※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 565, 試験用ふるい — 金属線布、穴あき金属板および電鋳シート — 開口部の呼び寸法
- ISO 3084, 鉄鉱石 — 品質変動を評価するための実験方法
- ISO 3085, 鉄鉱石 — サンプリング、サンプルの準備、測定の精度を確認するための実験方法
- ISO 3086, 鉄鉱石 — サンプリングの偏りをチェックするための実験方法
- ISO 3087, 鉄鉱石 - ロットの水分含有量の測定
- ISO 3271, 高炉および直接還元原料用の鉄鉱石 - タンブル指数と摩耗指数の決定
- ISO 3310-1, 試験用ふるい — 技術要件と試験 — Part 1: 金属ワイヤークロスの試験用ふるい
- ISO 3310-2, 試験用ふるい — 技術要件と試験 — Part 2: 穴あき金属板の試験用ふるい
- ISO 3852, 高炉および直接還元原料用の鉄鉱石 - かさ密度の決定
- ISO 4695, 高炉原料用鉄鉱石 — 還元率指数による還元性の決定
- ISO 4696-1, 高炉原料用鉄鉱石 — 静的方法による低温還元崩壊指数の決定 — Part 1: CO, CO 2 、H 2および N 2による還元
- ISO 4696-2, 高炉原料用鉄鉱石 — 静的方法による低温還元崩壊指数の決定 — Part 2: CO および N 2による還元
- ISO 4698, 高炉原料用鉄鉱石ペレット — 自由膨潤指数の決定
- ISO 4700, 高炉および直接還元原料用の鉄鉱石ペレット - 圧砕強度の決定
- ISO 4701, 鉄鉱石および直接還元鉄 - ふるいによるサイズ分布の決定
- ISO 7215, 高炉原料用鉄鉱石 — 最終還元度指数による還元性の決定
- ISO 7992, 高炉原料用鉄鉱石 — 負荷下での減少量の決定
- ISO 8371, 高炉原料用の鉄鉱石 - 劣化指数の決定
- ISO 11256, シャフト直接還元原料用の鉄鉱石ペレット — クラスタリング指数の決定
- ISO 11257, シャフト直接還元原料用鉄鉱石 — 低温還元崩壊指数と金属化度の決定
- ISO 11258, シャフト直接還元原料用鉄鉱石 - 還元性指数、最終還元度、金属化度の決定
- ISO 11323, 鉄鉱石および直接還元鉄 — 語彙
- ISO 13930, 高炉原料用鉄鉱石 — 動的方法による低温還元崩壊指数の決定
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
- ISO 3084, Iron ores — Experimental methods for evaluation of quality variation
- ISO 3085, Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
- ISO 3086, Iron ores — Experimental methods for checking the bias of sampling
- ISO 3087, Iron ores — Determination of the moisture content of a lot
- ISO 3271, Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
- ISO 3310-1, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth
- ISO 3310-2, Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
- ISO 3852, Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
- ISO 4695, Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index
- ISO 4696-1, Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2
- ISO 4696-2, Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
- ISO 4698, Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index
- ISO 4700, Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength
- ISO 4701, Iron ores and direct reduced iron — Determination of size distribution by sieving
- ISO 7215, Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index
- ISO 7992, Iron ores for blast furnace feedstocks — Determination of reduction under load
- ISO 8371, Iron ores for blast furnace feedstocks — Determination of the decrepitation index
- ISO 11256, Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index
- ISO 11257, Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO 11258, Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization
- ISO 11323, Iron ore and direct reduced iron — Vocabulary
- ISO 13930, Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method