この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました 。 www.iso.org/directives
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
この文書を担当する委員会は、ISO/TC 69, 統計的手法の適用、小委員会 SC 5, 受け入れサンプリングです。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください 。 http://www.is org/iso/home/standards_development/resources-for-technical-work/foreword.htm
この第 2 版は、第 1 版 (ISO 3951-2:2006) を取り消して置き換えるもので、次の変更を加えたマイナー リビジョンとなります。
- 測定の不確実性に対処するための手順が導入されています。
- サンプリング計画の多くは、その動作特性曲線と、ISO 2859-1 の属性による単一サンプリングの対応する計画の動作特性曲線との一致を改善するために調整されています。
ISO 3951 は、 「変数による検査のためのサンプリング手順」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 単一の品質特性および単一の AQL に対するロットごとの検査のための合格品質限界 (AQL) によってインデックス付けされた単一サンプリング計画の仕様
- Part 2: 独立した品質特性のロットごとの検査のための合格品質限界 (AQL) によって指標付けされた単一サンプリング計画の一般仕様
- Part 3: ロットごとの検査のための合格品質限界 (AQL) によって指標化された二重サンプリング スキーム
- Part 4: 宣言された品質レベルの評価手順
- Part 5: 変数 (既知の標準偏差) による検査のための合格品質限界 (AQL) によってインデックス付けされた順次サンプリング計画
ISO 3951-2:2013 のこの修正バージョンには、次の修正が含まれています。
- 条項 1, 文字 f)、ポイント 2) および 3):「 x ≥ U 」は「 x ≤ U 」に置き換えられました。
- 第 4 節、プロセス平均値 (6 th 目): 「プロセス平均値」は「不明なプロセス平均値」に置き換えられました。
- 第 11 条、注 1:「ISO 16269-4」への参照は「ISO 5479」への参照に置き換えられました。
- 第 11 条、注 2: 「ISO 5725-2 の第 2 条」への参照は、「ISO 2854」への参照に置き換えられました。
- 16.3.2.5, 「必要な情報」の最後の行:「(通常の検査であるため表 G.1 より)」は「(表 D.1 より、2.5% AQL で)」と値に置き換えられました。 0.115 4" は "0.064 66" に置き換えられました。
- 18.2, 例、第 2 段落、第 4 行:「1.0% の AQL の場合、」は「0.65% の AQL の場合、」に置き換えられていることがわかります。
- 18.3, 例: サンプル サイズが「20」ではなく「19」に修正され (数回発生)、抵抗の値 488 Ω が削除されました。 「さらなる情報が必要」および「代替のさらなる情報が必要」の下の値は、それに応じて修正されています。
- 20.2, 表 4 の下の段落:「表 G.1」への参照は「表 E.1」への参照に置き換えられました。
- O.2: 許容定数k 「1.962」から「1.963」に修正され、例が再計算されました。
- 参考文献: ISO 2854 および ISO 5479 が追加されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committee responsible for this document is ISO/TC 69, Application of statistical methods, Subcommittee SC 5, Acceptance sampling.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: http://www.iso.org/iso/home/standards_development/resources-for-technical-work/foreword.htm
This second edition cancels and replaces the first edition (ISO 3951-2:2006), of which it constitutes a minor revision with the following changes:
- procedures have been introduced to accommodate measurement uncertainty;
- many of the sampling plans have been adjusted to improve the match between their operating characteristic curves and the operating characteristic curves of the corresponding plans for single sampling by attributes in ISO 2859-1.
ISO 3951 consists of the following parts, under the general title Sampling procedures for inspection by variables:
- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
- Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- Part 4: Procedures for assessment of declared quality levels
- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
This corrected version of ISO 3951-2:2013 incorporates the following corrections:
- Clause 1, letter f), points 2) and 3):"x ≥ U" has been replaced with"x ≤ U";
- Clause 4, process mean (6th line):"process mean" has been replaced with"unknown process mean";
- Clause 11, Note 1: reference to"ISO 16269-4" has been replaced with a reference to"ISO 5479";
- Clause 11, Note 2: reference to"Clause 2 of ISO 5725-2" has been replaced with a reference to"ISO 2854";
- 16.3.2.5, under"Information needed", last line:"(from Table G.1 as it is normal inspection)" has been replaced with"(from Table D.1, with 2,5 % AQL)", and the value"0,115 4" has been replaced with"0,064 66";
- 18.2, Example, second paragraph, fourth line:", it is seen that for an AQL of 1,0 %," has been replaced with", it is seen that for an AQL of 0,65 %,";
- 18.3, Example: the sample size has been corrected to be"19" instead of"20" (several occurrences) and the value 488 Ω for the resistance has been deleted; under"Further information needed" and"Alternative further information needed", the values have been corrected accordingly;
- 20.2, paragraph below Table 4: reference to"Table G.1" has been replaced with a reference to"Table E.1";
- O.2: the acceptability constant k has been corrected from"1,962" to"1,963" and the example has been recalculated;
- Bibliography: ISO 2854 and ISO 5479 have been added.