この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 69, 工業用バルブと協力して、技術委員会 ISO/TC 185, 過度の圧力に対する保護のための安全装置によって作成されました。 ISO および CEN (ウィーン協定)
この第 2 版は、技術的に改訂された第 1 版 (ISO 4126-3:2006) を取り消して置き換えるものです。
前作からの主な変更点は以下の通り。
- ドキュメント全体で不要な参照と定義を削除しました。
- 条項 5: 以前の 6.2 からの入口ラインと圧力降下の要件は条項 5 に移動され、ISO 4126-9 への参照も追加されました。
- 条項 7: 特定の EN 規格への特定の参照を削除し、適用される圧力容器規格を参照して、このドキュメントのグローバルな性質を反映させました。
- 条項 9: 0.97 未満のFd値の制限が削除されました。
- 条項 12: Fd値がテストされた流量よりも大きいサイズに使用できる、適用可能な最小破裂圧力を明確にしました。
- 条項 14: 使用されているFdが認定された組み合わせ排出係数である場合、より効率的に試験証明書を提供するための要件が追加されました。
ISO 4126 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 185, Safety devices for protection against excessive pressure, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 69, Industrial valves, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 4126-3:2006), which has been technically revised.
The main changes compared to the previous edition are as follows:
- Eliminated unnecessary references and definitions throughout the document.
- Clause 5: Inlet line and pressure drop requirements from prior 6.2 were moved to Clause 5 and a reference to ISO 4126-9 was also added.
- Clause 7: Deleted specific references to specific EN standards to refer to the applicable pressure vessel standard to reflect the global nature of this document.
- Clause 9: The restrictions for Fd values less than 0,97 were eliminated.
- Clause 12: Clarified the applicable minimum bursting pressure for which the Fd value can be used for sizes larger than those flow tested.
- Clause 14: Added a requirement for the supplier to provide a test certificate if the Fd being used is a certified combination discharge coefficient.
A list of all parts in the ISO 4126 series can be found on the ISO website.