この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
ラウドネスとラウドネス レベルは、特定のリスニング条件下で人が知覚する音の強さの絶対的および相対的な感覚を表す、音の 2 つの知覚属性です。人には固有の個人差があるため、ラウドネスとラウドネス レベルはどちらも、一般集団の特定のサンプルに対して決定された中心傾向と分散のそれぞれの尺度によって特徴付けられる統計的推定量の性質を持っています。
ISO 532 シリーズの目的は、特定のリスニング条件下で耳科学的に正常な聴力を持つ人が知覚する音のラウドネスとラウドネス レベルを推定するために、音の物理的特性に基づく計算手順を指定することです。各手順では、多くの科学的および技術的アプリケーションで使用できる単一の数値を求めて、アプリケーションごとに個別の人間の観察研究を実施することなく、知覚されるラウドネスとサウンドのラウドネス レベルを推定します。ラウドネスは知覚量であり、その知覚は人によって異なる可能性があるため、計算されたラウドネス値は、耳科学的に正常な聴力を持つ個人のグループによって知覚される平均ラウドネスの推定値にすぎません。
ISO 532-1 と ISO 532-2 では、ラウドネスを計算するための 2 つの異なる方法が指定されており、特定のサウンドに対して異なる結果が得られる可能性があります。現時点ではどちらの方法についても一般的な好みを述べることができないため、特定の状況に最も適していると思われる方法を選択するのはユーザー次第です。選択を容易にするために、各方法のいくつかの主要な機能を以下に説明します。
このドキュメントは、定常音のラウドネスとラウドネス レベルの計算に限定されており、計算は音のスペクトル特性に基づいています。この計算方法は、Moore-Glasberg ラウドネス計算アルゴリズム[14-17]に基づいています。指定された信号スペクトルを、そのスペクトルを表す一連の正弦波成分に変換することから始めます。この系列は、4 つの連続した変換を適用することによって、特定のラウドネス パターンに変換されます。各変換は、人間の聴覚システムの生理学的および心理的特性に直接関連しています。ラウドネスは、特定のラウドネス パターンから計算されます。
このドキュメントでは、ラウドネスとラウドネス レベルの推定につながる計算手順について説明し、実行可能なコンピュータ プログラムとコードを提供します。このドキュメントで提供されるソフトウェアは、完全に参考情報であり、ユーザーの便宜のために提供されています。このドキュメントに準拠するために、提供されたソフトウェアを使用する必要はありません。
Moore-Glasberg 法は定常音に限定されており、トーン、広帯域ノイズ、および鋭い線スペクトル成分を含む複雑な音に適用できます。このドキュメントの方法は、ISO 532:1975 の方法とは異なります。 ISO 532:1975 の方法 A (スティーブンス ラウドネス[18] ) は、この方法はあまり使用されておらず、その予測は強い音成分を含む音に対して正確ではなかったため、削除されました。このドキュメントで説明されている方法は、低周波数範囲で計算されたラウドネスの精度も向上させ、2 つの耳で音が異なる条件下でのラウドネスの計算を可能にします。この方法は、ISO 226:2003 で定義されている等ラウドネス レベルの等高線と、ISO 389-7:2005 で定義されている聴力の基準しきい値によく一致することが示されています。
ISO 532-1 のツウィッカー法は、定常音と任意の非定常音に適用できます。 ISO 532-1 の定常音の方法は、以前の ISO 532:1975 の方法 B に含まれていた方法とはわずかに異なり、低周波の補正を指定し、アプローチの説明を数値指示のみに制限することで、独自の方法を可能にします。 1 つのソフトウェアの説明。継続性の理由から、ISO 532-1 に示されている方法は、後の改訂版である ISO 226:2003 ではなく、ISO 226:1987 に従っています。
注記機器または機械の騒音放出/放出は、さまざまな国際規格 (ISO 1996-1, ISO 3740, ISO 9612, および ISO 11200 などを参照) で定義されている他の量によっても判断できます。
Introduction
Loudness and loudness level are two perceptual attributes of sound describing absolute and relative sensations of sound strength perceived by a person under specific listening conditions. Due to inherent individual differences among people, both loudness and loudness level have the nature of statistical estimators characterized by their respective measures of central tendency and dispersion determined for a specific sample of the general population.
The object of the ISO 532- series is to specify calculation procedures based on physical properties of sound for estimating loudness and loudness level of sound as perceived by persons with otologically normal hearing under specific listening conditions. Each procedure seeks single numbers that can be used in many scientific and technical applications to estimate the perceived loudness and loudness level of sound without conducting separate human observer studies for each application. Because loudness is a perceived quantity, the perception of which may vary among people, any calculated loudness value represents only an estimate of the average loudness as perceived by a group of individuals with otologically normal hearing
ISO 532-1 and ISO 532-2 specify two different methods for calculating loudness which may yield different results for given sounds. Since no general preference for one or the other method can presently be stated, it is up to the user to select the method which appears most appropriate for the given situation. Some major features of each of the methods are described below to facilitate the choice.
This document is limited to calculation of loudness and loudness level of stationary sounds and the calculations are based on the spectral properties of a sound. This calculation method is based on Moore-Glasberg loudness calculation algorithms [14-17]. It starts by converting a specified signal spectrum into a series of sinusoidal components representing that spectrum. This series is then transformed into a specific loudness pattern by applying four consecutive transformations, each of which is directly related to physiological and psychological characteristics of the human hearing system. Loudness is calculated from the specific loudness pattern.
This document describes the calculation procedures leading to estimation of loudness and loudness level and provides an executable computer program and code. The software provided with this document is entirely informative and provided for the convenience of the user. Use of the provided software is not required for conformance with this document.
The Moore-Glasberg method is limited to stationary sounds and can be applied to tones, broadband noises and complex sounds with sharp line spectral components. The method in this document differs from those in ISO 532:1975. Method A of ISO 532:1975 (Stevens loudness[18]) was removed as this method was not often used and its predictions were not accurate for sounds with strong tonal components. The method described in this document also improves the precision of calculated loudness in the low frequency range and allows for calculation of loudness under conditions where the sound differs at the two ears. It has been shown that this method provides a good match to the contours of equal loudness level as defined in ISO 226:2003 and the reference threshold of hearing as defined in ISO 389-7:2005.
The Zwicker method in ISO 532-1 can be applied for stationary and arbitrary non-stationary sounds. The method for stationary sounds in ISO 532-1 differs slightly from the methods included in the previous ISO 532:1975, method B, by specifying corrections for low frequencies and by restricting the description of the approach to numerical instructions only, thus allowing a unique software description. For reasons of continuity, the method given in ISO 532-1 is in accordance with ISO 226:1987 instead of the later revised version, ISO 226:2003.
NOTE Equipment or machinery noise emissions/immissions can also be judged by other quantities defined in various International Standards (see e.g. ISO 1996-1, ISO 3740, ISO 9612 and ISO 11200).