この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 6721 のさまざまな部分では、線形粘弾性挙動の領域内での硬質プラスチックの動的機械的特性を決定するための方法が規定されています。この文書では、定義を指定し、後続のパートで説明する個々のテスト方法に共通するすべての側面を含む一般原則を説明します。
変形モードが異なると、直接比較できない結果が生じる可能性があります。たとえば、引張振動では試験片の厚さ全体にわたって均一な応力が生じますが、曲げ測定では試験片の表面領域の特性が優先的に影響します。
曲げ試験データから得られた値は、応力とひずみの関係が線形であるひずみレベルおよび均質な構造を持つ試験片の場合where 限り、引張試験データから得られた値と同等になります。
1 Scope
The various parts of ISO 6721 specify methods for the determination of the dynamic mechanical properties of rigid plastics within the region of linear viscoelastic behaviour. This document specifies the definitions and describes the general principles including all aspects that are common to the individual test methods described in the subsequent parts.
Different deformation modes can produce results that are not directly comparable. For example, tensile vibration results in a stress which is uniform across the whole thickness of the specimen, whereas flexural measurements are influenced preferentially by the properties of the surface regions of the specimen.
Values derived from flexural-test data will be comparable to those derived from tensile-test data only at strain levels where the stress-strain relationship is linear and for specimens which have a homogeneous structure.