この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 7176-5 は、技術委員会 ISO/TC 173, 障害のある人のための補助製品、小委員会 SC 1, 車椅子によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 7176-5:1986) を廃止し、置き換えます。
ISO 7176 は、 「車椅子」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 静的安定性の決定
- Part 2: 電動車椅子の動的安定性の決定
- Part 3: ブレーキの効き具合の判定
- Part 4: 理論上の距離範囲を決定するための電動車椅子および電動スクーターのエネルギー消費
- Part 5: 寸法、質量、および操作空間の決定
- Part 6: 電動車椅子の最高速度、加減速度の決定
- Part 7: シートと車輪の寸法の測定
- Part 8: 静的強度、衝撃強度、疲労強度の要件と試験方法
- Part 9: 電動車椅子の環境試験
- Part 10: 電動車椅子の障害物乗り越え能力の判定
- Part 11: テストダミー
- Part 13: 試験面の摩擦係数の決定
- Part 14: 電動車椅子および電動スクーターの電源および制御システム - 要件とテスト方法
- Part 15: 情報開示、文書化、およびラベル表示の要件
- Part 16: 布張り部品の耐発火性 - 要件と試験方法
- Part 19: 自動車の座席として使用する車輪付き移動装置
- Part 21: 電動車椅子、電動スクーター、およびバッテリー充電器の電磁両立性に関する要件と試験方法
- Part 22: セットアップ手順
- Part 23: 介助者が操作する階段昇降装置の要件と試験方法
- Part 24: ユーザー操作の階段昇降装置の要件とテスト方法
- Part 26: 語彙
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7176-5 was prepared by Technical Committee ISO/TC 173, Assistive products for persons with disability, Subcommittee SC 1, Wheelchairs.
This second edition cancels and replaces the first edition (ISO 7176-5:1986) which has been technically revised.
ISO 7176 consists of the following parts, under the general title Wheelchairs:
- Part 1: Determination of static stability
- Part 2: Determination of dynamic stability of electric wheelchairs
- Part 3: Determination of effectiveness of brakes
- Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
- Part 5: Determination of dimensions, mass and manoeuvring space
- Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs
- Part 7: Measurement of seating and wheel dimensions
- Part 8: Requirements and test methods for static, impact and fatigue strengths
- Part 9: Climatic tests for electric wheelchairs
- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
- Part 11: Test dummies
- Part 13: Determination of coefficient of friction of test surfaces
- Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
- Part 15: Requirements for information disclosure, documentation and labelling
- Part 16: Resistance to ignition of upholstered parts - Requirements and test methods
- Part 19: Wheeled mobility devices for use as seats in motor vehicles
- Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters, and battery chargers
- Part 22: Set-up procedures
- Part 23: Requirements and test methods for attendant-operated stair-climbing devices
- Part 24: Requirements and test methods for user-operated stair-climbing devices
- Part 26: Vocabulary