この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、欧州標準化委員会 (CEN) 技術委員会と協力して、技術委員会 ISO/TC 28, 天然または合成源からの石油および関連製品、燃料および潤滑油、小委員会 SC 2, 石油および関連製品の測定によって作成されました。 CEN/TC 19 ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に基づく、石油、合成および生物起源の気体および液体燃料、潤滑油および関連製品。
この第 2 版は、技術的に改訂された第 1 版 (ISO 7278-2:1988) を取り消して置き換えるものです。また、内容が組み込まれた ISO 7278-4:1999 の初版を取り消して差し替えます。
主な変更点は次のとおりです。
- 内容と範囲は現在、ISO 7278-2:1988 で提供されているパイプ プルーバーの設計と、廃止される ISO 7278-4:1999 で提供されているオペレーター向けのガイダンスをカバーしています。
- さまざまなタイプのパイプ プローバーの設計と操作方法が定義され、説明されています。
- さまざまな操作方法と、それらをさまざまな相対的なサイズの流量計校正に適用する手段について説明しました。
- 少量 (コンパクト) 証明器設計の設計、キャリブレーション、および使用が含まれています。
- このドキュメントは、ベスト プラクティスを反映するために規範ドキュメントからガイダンス ドキュメントに変更されました。
- この文書は、米国石油協会 (API) およびエネルギー協会 (EI) によって作成された代替規格に記載されている実践の変更を考慮に入れています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants from natural or synthetic sources, Subcommittee SC 2, Measurement of petroleum and related products, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 19 Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 7278-2:1988), which has been technically revised. It also cancels and replaces the first edition of ISO 7278-4:1999, the content of which has been incorporated.
The main changes are as follows:
- The content and scope now covers the design of pipe provers given in ISO 7278-2:1988 and the guidance for operators given in ISO 7278-4:1999, which will be withdrawn.
- The different types of pipe prover designs and operating methods have been defined and described.
- The variety of operational methods and the means to apply them to flowmeter calibration of different relative sizes has been described.
- The design, calibration and use of small volume (compact) prover designs has been included.
- The document has been changed from a normative document to a guidance document to reflect best practices.
- The document takes into account changes in practice described in alternative standards produced by the American Petroleum Institute (API) and the Energy Institute (EI).