この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
微生物学的検査を実施する研究室では、主な目的は、多種多様な微生物を捕獲、蘇生、増殖、検出、または計数すること、またはすべてを行うことです。メンブレンフィルターは、多くの伝統的な微生物培養技術で使用されており、さまざまなブランドやタイプで市販されています。文献で報告されているメンブレン フィルターの多くの比較研究では、水サンプルから細菌を回収する能力の違いが示されています。参考文献 [22], [23], [28], [30], [31], [32] を参照してください。 、[33] および [34複雑な製造プロセスは、化学組成、細孔サイズ、細孔構造がブランドや材料のロットによって異なることを意味します。さらに、製造プロセスでは、微生物の回収を妨げる可能性のある浸出物も放出される可能性があります。
したがって、一貫した結果を提供するだけでなく、特定の微生物を列挙するための標準化された手順の開発を可能にするために、メンブレンフィルターの性能試験を可能な限り標準化することが非常に重要です。
Introduction
In laboratories carrying out microbiological examinations, the main objectives are to either capture, resuscitate, grow, detect or enumerate, or all, a wide variety of microorganisms. Membrane filters are used in many traditional microbiological culture techniques and are commercially available in various brands and types. Many comparison studies of membrane filters which have been reported in the literature show differences in their ability to recover bacteria from water samples, see References [22], [23], [28], [30], [31], [32], [33] and [34]. The complex manufacturing process means that the chemical composition, pore size and pore structure can vary, depending on the brands, and even on the lot of material. Furthermore, the manufacturing process can also release leachables that can potentially interfere with the recovery of microorganisms.
Thus, it is very important to standardize the performance testing of membrane filters as much as possible, not only to provide consistent results, but also to enable the development of standardized procedures for enumerating specific microorganisms.