この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、保持に使用されるメンブレンフィルターの性能試験の要件と、その後の培養方法による微生物の直接的な計数に関する要件を規定しています。
このドキュメントは、保持のために使用されるメンブレンフィルターに適用され、その後、固体培地または吸収パッドなどの培地を含む他のデバイス上で特定の微生物を直接列挙します[ 19] 。
この文書は、濃縮および溶出または定性分析に使用されるメンブレンフィルターには適用されません。
これらの試験は、次のようなさまざまな種類の水の微生物学的分析を目的としたメンブレン フィルターに適用できます。
- 飲料水、ボトル入り飲料水、および微生物数が少ないと予想されるその他の種類の水。
- 地表水やプロセス水など、より多くの微生物が予想される水。
これらのテストは、参考文献 [3], [6], [8], [10], [ 12] と [13
このドキュメントは以下に適用されます。
- メンブレンフィルターを製造するメーカー。
- メンブレンフィルターを独自のテストに使用するか、他のエンドユーザーに提供する微生物研究所。
1 Scope
This document specifies the requirements for the performance testing of membrane filters used for the retention followed by direct enumeration of microorganisms by culture methods.
This document is applicable to membrane filters which are used for retention followed by direct enumeration of specific microorganisms on solid media or on other devices containing media, like absorbent pads[19].
This document is not applicable for membrane filters used for concentration and elution or for qualitative methods.
These tests are applicable to the membrane filters intended for the microbiological analysis of different types of water, such as:
- drinking water, bottled water and other types of water with expected low numbers of microorganisms;
- water with expected higher numbers of microorganisms, for example, surface water and process water.
These tests are intended to demonstrate the suitability of the whole system (membrane filter together with the culture medium including the filtration step) required for the specific tests described in References [3], [6], [8], [10], [12] and [13].
This document applies to:
- manufacturers producing membrane filters;
- microbiological laboratories using membrane filters for their own testing or providing these to other end users.