この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9241-303 は、技術委員会 ISO/TC 159, 人間工学、小委員会 SC 4, 人間とシステムの相互作用の人間工学によって作成されました。
この第 2 版は、第 1 版 (ISO 9241-303:2008) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。 ISO 9241-302 および ISO 9241-305 とともに、ISO 9241-303:2008 は ISO 9241-8 を廃止して置き換え、ISO 9241-302, ISO 9241-305 および ISO 9241-307 とともに、ISO 9241 を廃止して置き換えました。 -7 および ISO 13406-2, および ISO 9241-3 を部分的に置き換え:
- 電子ビジュアルディスプレイに関連する用語と定義は ISO 9241-302 に移管され、ISO 9241-302 にまとめられました。
- ISO 9241 および ISO 13406 で以前カバーされていた領域は本質的に変更されていませんが、科学と技術の進歩を考慮して試験方法と要件が更新されました。
- すべての一般的な人間工学的要件が ISO 9241-303 に組み込まれました。
- ISO 9241-307 では、これらの要件をさまざまなディスプレイ技術、アプリケーション分野、および環境条件 (試験方法および合格/不合格基準を含む) に適用することが規定されています。
ISO 9241 は、次の部分で構成されており、一般的なタイトルは、「ビジュアル ディスプレイ ターミナル (VDT) を使用するオフィス ワークの人間工学的要件」です。
- Part 1: 一般的な紹介
- Part 2: タスク要件に関するガイダンス
- Part 4: キーボードの要件
- Part 5: ワークステーションのレイアウトと姿勢の要件
- Part 6部 作業環境の案内
- Part 9: キーボード以外の入力デバイスの要件
- Part 11: ユーザビリティに関するガイダンス
- Part 12: 情報の提示
- Part 13: ユーザー ガイダンス
- Part 14: メニュー ダイアログ
- Part 15: コマンド ダイアログ
- Part 16: 直接操作ダイアログ
- Part 17: フォーム入力ダイアログ
ISO 9241 は、人間とシステムの相互作用の人間工学という一般的なタイトルの下に、次の部分で構成されています。
- Part 20: 情報通信技術 (ICT) 機器およびサービスのアクセシビリティ ガイドライン
- Part 100: ソフトウェアエルゴノミクス関連規格の紹介【テクニカルレポート】
- Part 110: 対話の原則
- Part 129: ソフトウェアの個別化に関するガイダンス
- Part: フォーム
- Part 151: World Wide Web ユーザー インターフェイスに関するガイダンス
- Part 171: ソフトウェアのアクセシビリティに関するガイダンス
- Part 210: 対話型システムの人間中心設計
- Part 300: 電子ビジュアル ディスプレイ要件の概要
- Part 302: 電子映像ディスプレイの用語
- Part 303: 電子ビジュアル ディスプレイの要件
- Part 304: 電子ビジュアル ディスプレイのユーザー パフォーマンス テスト方法
- Part 305: 電子ビジュアル ディスプレイの光学実験室試験方法
- Part 306: 電子ビジュアル ディスプレイのフィールド評価方法
- Part 307: 電子ビジュアル ディスプレイの分析およびコンプライアンス テスト方法
- Part 308: 表面伝導型電子放出ディスプレイ (SED) [テクニカルレポート]
- Part 309: 有機発光ダイオード (OLED) ディスプレイ[テクニカル レポート]
- Part 310: ピクセル欠陥の可視性、美学、人間工学[テクニカル レポート]
- Part 400: 物理入力デバイスの原則と要件
- Part 410: 物理入力デバイスの設計基準
- Part 411: 物理入力デバイスの設計のための評価方法[技術仕様]
- Part 420: 物理入力デバイスの選択
- Part 910: 触覚および触覚相互作用のフレームワーク
- Part 920: 触覚および触覚相互作用に関するガイダンス
次の部分は準備中です。
- Part 154: 対話型音声応答 (IVR) アプリケーション
人間中心の設計と評価方法、裸眼立体視ディスプレイの光学特性、および光過敏発作を減らすための要件、分析、およびコンプライアンス テスト方法は、将来のPart 230, 331, および 391 の主題を形成する予定です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9241-303 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 4, Ergonomics of human-system interaction.
This second edition cancels and replaces the first edition (ISO 9241-303:2008), of which it constitutes a minor revision. Together with ISO 9241-302 and ISO 9241-305, ISO 9241-303:2008 cancelled and replaced ISO 9241-8, and together with ISO 9241-302, ISO 9241-305 and ISO 9241-307, it cancelled and replaced ISO 9241-7 and ISO 13406-2, and partially replaced ISO 9241-3:
- terms and definitions related to electronic visual displays were transferred to, and collected in, ISO 9241-302;
- while the areas previously covered in ISO 9241 and by ISO 13406 remained essentially unchanged, test methods and requirements were updated to account for advances in science and technology;
- all generic ergonomic requirements were incorporated into ISO 9241-303;
- the application of those requirements to different display technologies, application areas and environmental conditions — including test methods and pass/fail criteria — is specified in ISO 9241-307.
ISO 9241 consists of the following parts, under the general title Ergonomic requirements for office work with visual display terminals (VDTs):
- Part 1: General introduction
- Part 2: Guidance on task requirements
- Part 4: Keyboard requirements
- Part 5: Workstation layout and postural requirements
- Part 6: Guidance on the work environment
- Part 9: Requirements for non-keyboard input devices
- Part 11: Guidance on usability
- Part 12: Presentation of information
- Part 13: User guidance
- Part 14: Menu dialogues
- Part 15: Command dialogues
- Part 16: Direct manipulation dialogues
- Part 17: Form filling dialogues
ISO 9241 also consists of the following parts, under the general title Ergonomics of human-system interaction:
- Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
- Part 100: Introduction to standards related to software ergonomics [Technical Report]
- Part 110: Dialogue principles
- Part 129: Guidance on software individualization
- Part 143: Forms
- Part 151: Guidance on World Wide Web user interfaces
- Part 171: Guidance on software accessibility
- Part 210: Human-centred design for interactive systems
- Part 300: Introduction to electronic visual display requirements
- Part 302: Terminology for electronic visual displays
- Part 303: Requirements for electronic visual displays
- Part 304: User performance test methods for electronic visual displays
- Part 305: Optical laboratory test methods for electronic visual displays
- Part 306: Field assessment methods for electronic visual displays
- Part 307: Analysis and compliance test methods for electronic visual displays
- Part 308: Surface-conduction electron-emitter displays (SED) [Technical Report]
- Part 309: Organic light-emitting diode (OLED) displays [Technical Report]
- Part 310: Visibility, aesthetics and ergonomics of pixel defects [Technical Report]
- Part 400: Principles and requirements for physical input devices
- Part 410: Design criteria for physical input devices
- Part 411: Evaluation methods for the design of physical input devices [Technical Specifiction]
- Part 420: Selection of physical input devices
- Part 910: Framework for tactile and haptic interaction
- Part 920: Guidance on tactile and haptic interactions
The following parts are under preparation:
- Part 154: Interactive voice response (IVR) applications
Human-centred design and evaluation methods, optical characteristics of autostereoscopic displays, and requirements, analysis and compliance test methods for the reduction of photosensitive seizures are to form the subjects of future parts 230, 331 and 391.