※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
ASTM インターナショナルは、影響を受ける利害関係者が世界中から参加する世界最大の自主規格開発組織の 1 つです。 ASTM 技術委員会は、厳格な適正手続きによる投票手順に従っています。
ISO/ASTM 放射線処理線量測定基準のグループを開発および維持するために、ISO と ASTM インターナショナルの間のパイロット プロジェクトが設立されました。このパイロットプロジェクトでは、ASTM 委員会 E61 放射線処理部門が、適切な ISO 加盟団体からの無制限の参加と意見を得て、これらの線量測定基準の開発と維持を担当しています。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO も ASTM International も、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO/ASTM 51261 は、ASTM 委員会 E61「放射線処理」、小委員会 E61.01「線量測定」を経て、ISO/TC 85 技術委員会「原子力エネルギー、核技術および放射線防護」によって開発されました。
放射線処理用の日常線量測定システムの校正に関する標準慣例1
この規格は、ISO/ASTM 51261 という固定名称で発行されています。指定の直後の数字は、最初の採用年、または改訂の場合は最終改訂の年を示します。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote.
ASTM International is one of the world’s largest voluntary standards development organizations with global participation from affected stakeholders. ASTM technical committees follow rigorous due process balloting procedures.
A pilot project between ISO and ASTM International has been formed to develop and maintain a group of ISO/ASTM radiation processing dosimetry standards. Under this pilot project, ASTM Committee E61, Radiation Processing, is responsible for the development and maintenance of these dosimetry standards with unrestricted participation and input from appropriate ISO member bodies.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. Neither ISO nor ASTM International shall be held responsible for identifying any or all such patent rights.
International Standard ISO/ASTM 51261 was developed by ASTM Committee E61, Radiation Processing, through Subcommittee E61.01, Dosimetry, and by Technical Committee ISO/TC 85, Nuclear energy, nuclear technologies and radiological protection.
Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing 1
This standard is issued under the fixed designation ISO/ASTM 51261; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.