この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際標準は、私設統合サービス ネットワーク (PISN) の一部を形成する 2 つの私設統合サービス ネットワーク交換 (PINX) を相互接続するために、H.323 パケット ネットワークを使用する機能を指定します。相互接続は、H.323 のプロトコル トンネリング機能を利用して、H.323 コール シグナリング チャネル上で PINX 間シグナリング プロトコルを搬送し、H. 323.各論理チャネルは通常、リアルタイム トランスポート プロトコル (RTP) によって伝送される一方向のメディア ストリームを表します。 PINX 間シグナリング プロトコルは、ISO/IEC 11572, ISO/IEC 11582, およびその他の規格で指定されている QSIG であると想定されます。
この国際標準は、オンデマンド タイプの相互接続をここで, 各 PISN 通話の開始時に個別の H.323 通話が確立され、その通話の終了時にクリアされます。有効期間が無期限の単一の H.323 コールが多くの PISN コールに代わって QSIG を伝送する半永久的なシナリオwhere 追加オプションとして説明されています。
この国際標準でカバーされているシナリオでは、通話に参加している PINX は相互接続を提供している H.323 ネットワークを必ずしも認識しているわけではなく、利用可能な機能は QSIG ネットワークの機能です。これは、QSIG と H.323 間の真のインターワーキング (つまり、QSIG – H.323 – QSIG) を使用して 2 つの PISN または同じ PISN の 2 つの部分を接続するwhere とは異なります。後者の場合、すべてのネットワークが平等な条件で通話に参加し、機能はすべてのネットワークで利用可能でゲートウェイによってサポートされる機能に限定されます。この後者のシナリオは、この国際規格の範囲外です。
この国際規格は、PINX 間シグナリング プロトコルとして QSIG を使用して相互接続して PISN を形成できる PINX に適用されます。
1 Scope
This International Standard specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and inter-PINX user information (e.g., voice) over logical channels established through H.323. Each logical channel usually represents a unidirectional media stream conveyed by means of the Real-time Transport Protocol (RTP). The inter-PINX signalling protocol is assumed to be QSIG, as specified in ISO/IEC 11572, ISO/IEC 11582 and other standards.
This International Standard provides for an on-demand type of interconnection ここで, a separate H.323 call is established at the start of each PISN call and cleared down at the end of that call. A semi-permanent scenario where a single H.323 call with an indefinite lifetime carries QSIG on behalf of many PISN calls is described as an additional option.
In the scenarios covered in this International Standard, the PINXs participating in a call are not necessarily aware of the H.323 network providing the interconnection, and the features available are those of the QSIG network. This is different from a scenario where true interworking between QSIG and H.323 (i.e. QSIG–H.323–QSIG) is used to connect two PISNs or two parts of the same PISN. In this latter case all networks participate in a call on equal terms, and features are limited to those available in all networks and supported by the gateways. This latter scenario is outside the scope of this International Standard.
This International Standard is applicable to PINXs that can be interconnected to form a PISN using QSIG as the inter-PINX signalling protocol.