この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
6 はじめに
6.1 参考構成
ISO/IEC 11579-1 は、PINX の参照構成を定義しています。論理的には、PINX のスイッチングおよび呼制御機能は、Q 参照ポイントのインスタンスを介してピア PINX と通信します。この通信は Inter-PINX Link (IPL) として知られており、D Q チャネルとして知られるシグナリング チャネルと、それぞれ U Q チャネルとして知られる 1 つ以上のユーザー情報チャネルで構成されます。図 1 を参照してください。同じ PINX ペア間で 1 つ以上の IPL を確立できます。
図 1 — IPL の概念
IPL を実装するにはさまざまな方法があります。一般に、IPL は、Intervening Network (IVN) として知られる別のネットワークのサービスを使用します。 PINX は、C 参照ポイントで IVN にインターフェイスします。 IVN は、ピア PINX の C 参照ポイント間に Inter-PINX Connection (IPC) と呼ばれる接続を提供します。各 PINX 内のマッピング関数は、Q 基準点の D Q チャネルと U Q チャネルを C 基準点の 1 つまたは複数の IPC にマッピングします。
6.2 特定のシナリオ
この国際規格は、IVN が次のタイプの IPC を提供するために使用される H.323 パケット ネットワークである場合に使用するマッピング機能を指定します。
- シグナリング情報を伝送するためのシグナリング接続。そして
- RTP 経由でユーザー情報を伝送するための、各方向に 1 つのストリームを含む 1 組の UDP ストリーム。
注ユーザー情報を転送する他の手段、たとえば、RTP を使用しない T.38 ファックス、ATM 仮想チャネル、または UDP ストリームの代わりの双方向 TCP 接続を使用することもできます。詳細については、H.323 を参照してください。これらのケースは、この国際規格の範囲外です。
単一の IPL には、D Q チャネルのサポートのための単一のシグナリング接続と、U Q チャネルごとに 1 ペアの UDP ストリームが必要です。
この国際規格で説明されている主な PINX 間接続シナリオは、オンデマンド接続シナリオです。これは、PISN 通話セグメントが 2 つの PINX 間で設定されるときは常に IPL が確立され、PISN 通話が終了すると解放されることを意味します。オプションの半永続的なシナリオもここで, 複数の同時または連続した PISN 呼び出しで同じ IPL を使用できます。
どちらのシナリオでも、シグナリング接続は、H.225.0 および H.323 Annex M.1 によって提供されるプロトコル トンネリング機能を使用して、H.323 コールによって確立されます。 QSIG シグナリングのトンネリングと組み合わせた H.225.0 コール シグナリング接続は、D Q チャネルを提供するために使用されます。 PINX ユーザー間接続 (U Q チャネル) を提供するために使用される UDP ストリームのペアは、H.323 論理チャネルとして確立されます。 IPL には複数の U Q チャネルがある場合があります。
図 2 はこれらの概念を示しています。
図 2 —介在ネットワーク (IVN) としての H.323
これらのシナリオをサポートする IPC は、いずれかの PINX の制御下でいつでも確立および解放できます。 IPC 障害が発生した場合、H.323 ネットワークは通話確立要求を拒否するか、すでに確立されている通話を解放することがあります。
単一の PINX は、同じおよび/または異なるピア PINX につながる複数の IPL を終了できます。各 IPL は単一の H.323 コールで構成されます。
6.3 H.323ゲートウェイとの関係
H.323 ネットワーク経由で別の PINX に接続された各 PINX は、H.323 用語でトランキング ゲートウェイを表します。 H.323 ゲートウェイ機能は、PINX のマッピング機能の一部です。この国際規格には特定の実装は含まれていません。 H.323 で説明されているように、ゲートウェイ機能は完全に統合されるか、いくつかのコンポーネント (メディア ゲートウェイ コントローラーやメディア ゲートウェイなど) に分解される場合があります。
ゲートウェイのタスクには、パケット化/パケット化解除、シグナリング インターワーキングなどのユーザー データまたはメディアの処理が含まれます。後者は主に、後続の節で詳しく説明するように、H.323 通話上で QSIG をトンネリングできるようにします。
図 3 は、PISN コールと、PISN コールの 1 つのセグメントに PINX 間リンクを提供する基礎となる H.323 コールとの関係の例を示しています。
図 3 — PISN 通話と H.323 通話の関係の例
6 Introduction
6.1 Reference configuration
ISO/IEC 11579-1 defines a reference configuration for a PINX. Logically the switching and call control functions of a PINX communicate over an instance of the Q reference point with a peer PINX. This communication is known as an Inter-PINX Link (IPL) and comprises a signalling channel, known as a DQ-channel, and one or more user information channels, each known as a UQ-channel; see Figure 1. One or more IPLs can be established between the same pair of PINXs.
Figure 1 — IPL concept
There are many ways of implementing an IPL. In general, the IPL uses services of another network, known as an Intervening Network (IVN). A PINX interfaces to the IVN at the C reference point. The IVN provides connections, known as Inter-PINX Connections (IPCs) between the C reference points of the peer PINXs. Mapping functions within each PINX map the DQ-channel and the UQ-channels at the Q reference point onto one or more IPCs at the C reference point.
6.2 Specific scenarios
This International Standard specifies mapping functions for use when the IVN is an H.323 packet network that is used to provide the following types of IPC:
- a signalling connection for carrying signalling information; and
- a pair of UDP streams, one stream in each direction, for carrying user information over RTP.
NOTE Other means of transporting user information can be used, e.g. T.38 fax without RTP, an ATM virtual channel, or a bi-directional TCP connection instead of UDP streams. See H.323 for more details. These cases are outside the scope of this International Standard.
A single IPL requires a single signalling connection, for support of the DQ-channel, and one pair of UDP streams per UQ-channel.
The main inter-PINX connection scenario described in this International Standard is an on-demand connection scenario. This means that an IPL is established whenever a PISN call segment is to be set up between two PINXs and released when the PISN call ends. An optional semi-permanent scenario is also described ここで, multiple concurrent or consecutive PISN calls can use the same IPL.
In both scenarios the signalling connection is established by means of an H.323 call, using the protocol tunnelling facilities provided by H.225.0 and H.323 Annex M.1. The H.225.0 call signalling connection in conjunction with the tunnelling of the QSIG signalling is used to provide the DQ-channel. The pair of UDP streams used to provide an inter-PINX user connection (UQ-channel) is established as H.323 logical channel(s). An IPL may have multiple UQ-channels.
Figure 2 illustrates these concepts.
Figure 2 — H.323 as intervening network (IVN)
IPCs in support of these scenarios can be established and released at any time under the control of either PINX. In case of IPC failure, the H.323 network may reject a call establishment request or release an already established call.
A single PINX can terminate a multiplicity of IPLs leading to the same and/or different peer PINXs. Each IPL comprises a single H.323 call.
6.3 Relationship with H.323 gateways
Each PINX connected to another PINX via an H.323 network represents a trunking gateway in H.323 terms. The H.323 gateway functionality is part of the mapping functions of the PINX. No specific implementation is implied by this International Standard. The gateway function may be fully integrated or decomposed into several components (e.g. media gateway controller and media gateway), as explained in H.323.
The tasks of the gateway include the handling of user data or media, e.g. packetization/ de-packetization, and signalling interworking. The latter mainly enables QSIG to be tunnelled over an H.323 call, as specified in more detail in subsequent clauses.
Figure 3 shows an example of the relationship between a PISN call and the underlying H.323 call which provides the inter-PINX link for one segment of the PISN call.
Figure 3 — Example of the relationship between PISN call and H.323 call