この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、関連コンポーネントを備えたフレーム内に永久的に取り付けられた複合チューブのアセンブリの製造時の材料、設計構造と仕上がり、製造プロセス、検査とテストに関する最小要件を指定します。
この文書の要件の対象となるチューブは次のとおりです。
- a)輸送フレームに恒久的に取り付けられ、指定された使用条件に適した複合構造のもので、次のように指定されます。
- 1) Type 3 — 円筒部分とドーム端の両方に継ぎ目のない金属ライナーと複合補強材を備えた完全に包まれたチューブ。または
- 2) Type 4 — 円筒部分とドーム端の両方に非荷重分散ライナーと複合補強材を備えた完全にラップされたチューブ。
b) 450 リットルから 10,000 リットルまでの水容量。
c)圧縮ガスを含むが、以下を除くもの:
- 1)液化ガス、
- 2)溶存ガス、および
- 3)有毒または酸化性として輸送用に分類されるガスおよびガス混合物。
d)最大 1,000 bar の作動圧力。
この文書では、作動圧力と水容量の積 (p × V) が 3 000 000 bar・l を超えるチューブについては扱いません。
1 Scope
This document specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components.
Tubes covered by the requirements of this document are:
- a) of composite construction, permanently mounted in a transport frame and suitable for specified service conditions, designated as:
- 1)Type 3 — a fully wrapped tube with a seamless metallic liner and composite reinforcement on both the cylindrical part and the dome ends; or
- 2)Type 4 — a fully wrapped tube with a non-load sharing liner and composite reinforcement on both the cylindrical part and the dome ends.
b) with water capacities from 450 l up to and including 10 000 l;
c) containing compressed gases but excluding:
- 1) liquefied gases,
- 2) dissolved gases, and
- 3) gases and gas mixtures which are classified for transport as toxic or oxidizing;
d) with working pressure up to 1 000 bar.
This document does not address tubes with working pressure times water capacity (p × V) more than 3 000 000 bar∙l.