ISO 11783-14:2013 農林業用のトラクターと機械—シリアル制御と通信データネットワーク—パート14:シーケンス制御 | ページ 5

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

2 規範的参照

以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO 11783-1, 農業および林業用のトラクターおよび機械 — シリアル制御および通信データ ネットワーク — Part 1: モバイル データ通信の一般規格
  • ISO 11783-3, 農業および林業用のトラクターおよび機械 — シリアル制御および通信データ ネットワーク — Part 3: データ リンク層
  • ISO 11783-5, 農業および林業用のトラクターおよび機械 — シリアル制御および通信データ ネットワーク — Part 5: ネットワーク管理
  • ISO 11783-6, 農業および林業用のトラクターおよび機械 — シリアル制御および通信データ ネットワーク — Part 6: 仮想端末

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO 11783-1, Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication
  • ISO 11783-3, Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer
  • ISO 11783-5, Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management
  • ISO 11783-6, Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal