この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください: 序文 - 補足情報 .
この文書を担当する委員会は、ISO/TC 188, Small craftです。
この第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 12217-2:2013) を取り消して置き換えるものです。次の変更が組み込まれています。
- はじめに: 欧州指令への参照が更新されました (2013/53/EU)
- 条項 1, 6.2.1.6 d) 3)、7.6, 7.11, 7.12, 7.13, 附属書 I, 表 I.2, および附属書 J, ワークシート 2, 12, 14, および 16: 脆弱性は脆弱性に置き換えられました。
- 条項 3: 定義 3.1.1, 3.5.5, 3.5.6, および 3.6.11 が修正されました。
- 6.3.1 節: リストの 2 番目の項目が挿入されました。
- 節 6.3.2.3 および 6.3.2.4: フォーミュラ係数が修正されました。
- 節 6.6.2: 指数 '0,3' が削除されました。
- 6.6.7 節: 記号が修正されました。
- 6.6.8 節: 「水で完全に浸水した」という表現を説明する注記が追加されました。
- 条項 9.2: 本文と表 11 が修正されました。
- H.3.2 節 c): 式の係数が修正されました。
- 附属書 J: ワークシート 1, 2, 5, 7, 12, および 16 は、上記の修正に合わせて修正されました。
- 附属書 K が追加されました。
- 参考文献: ISO 7010 への参照が追加されました。
- 表 1, 附属書 J, ワークシート 1, 5, 7, 12, 14, および 16, および 6.3.1, 6.3.2.2, および 6.3.2.3 の節に対して、編集および相互参照の修正が行われました。
ISO 12217 は、以下の部分で構成されており、一般的なタイトルは「小型船 — 安定性と浮力の評価と分類」です。
- Part 1: 船体の長さが 6 m 以上の非帆船
- Part 2: 船体の長さが 6 m 以上の帆船
- Part 3: 船体の長さが 6 m 未満のボート
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information .
The committee responsible for this document is ISO/TC 188, Small craft.
This third edition cancels and replaces the second edition (ISO 12217-2:2013), of which it constitutes a minor revision. It incorporates the following modifications:
- Introduction: the reference to the European Directive has been updated (2013/53/EU);
- Clause 1, 6.2.1.6 d) 3), 7.6, 7.11, 7.12, 7.13, Annex I, Table I.2, and Annex J, Worksheets 2, 12, 14 and 16: vulnerable has been replaced with susceptible;
- Clause 3: definitions 3.1.1, 3.5.5, 3.5.6 and 3.6.11 have been amended;
- Subclause 6.3.1: second item in the list has been inserted;
- Subclauses 6.3.2.3 and 6.3.2.4: formulae coefficients have been corrected;
- Subclause 6.6.2: exponent ‘0,3’ has been deleted;
- Subclause 6.6.7: symbols have been corrected;
- Subclause 6.6.8: a note has been added to explain the phrase"fully flooded with water";
- Clause 9.2: the text and Table 11 have been amended;
- Subclause H.3.2 c): the coefficient in the formula has been corrected;
- Annex J: worksheets 1, 2, 5, 7, 12 and 16 have been corrected to align with corrections listed above;
- Annex K has been added;
- Bibliography: reference to ISO 7010 has been added;
- Editorial and cross-referencing corrections have been made to Table 1, Annex J, worksheets 1, 5, 7, 12, 14 and 16, and to subclauses 6.3.1, 6.3.2.2 and 6.3.2.3.
ISO 12217 consists of the following parts, under the general title Small craft — Stability and buoyancy assessment and categorization:
- Part 1: Non-sailing boats of hull length greater than or equal to 6 m
- Part 2: Sailing boats of hull length greater than or equal to 6 m
- Part 3: Boats of hull length less than 6 m