この規格 プレビューページの目次
- 序文Foreword
- 導入Introduction
- 範囲Scope
- 1 一般用語1 General terms
- 2 機械の特性2 Machine characteristics
- 3 運用・保守3 Operation and maintenance
- 4 つの欠陥4 Faults
- 5 データ収集とデータ取得5 Data collection and data acquisition
- 6 データの特性6 Data characteristics
- 7 データ処理と信号処理7 Data processing and signal processing
- 8 微積分8 Analysis
- 9 つの診断9 Diagnostics
- 10 予後10 Prognostics
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
10 予後
10.1
可用性.可用性
指定された条件下で使用された場合、 機械 (1.10) が 満足にかつ効果的に動作する確率
10.2
予後
故障までの時間 (1.7) と 1 つ以上の初期 故障モードのリスク (4.6) の推定
参考文献
| 1 | ISO 1925, 機械振動 — バランス — 語彙 |
| 2 | ISO 2041, 機械振動、衝撃および状態の監視 — 語彙 |
| 3 | ISO/IEC 2382-14, 情報技術 - 語彙 - Part 14: 信頼性、保守性、および可用性 |
| 4 | ISO 13373, (すべての部分)、機械の状態監視と診断 — 振動状態監視 |
| 5 | ISO 13374-1, 機械の状態監視と診断 — データ処理、通信、およびプレゼンテーション — Part 1: 一般ガイドライン |
| 6 | ISO 1337, 機械の状態監視と診断 — データ解釈と診断技術 |
| 7 | ISO 13381-1, 機械の状態監視と診断 — 予後 — Part 1: 一般ガイドライン |
| 8 | ISO 17359, 機械の状態監視と診断 — 一般ガイドライン |
| 9 | ISO 1843, 機械の状態監視と診断 — 担当者の資格と評価の要件 |
| 10 | IEC 60050-191, 国際電気技術語彙 — 第 191 章: 信頼性とサービス品質 |
| 11 | IEC 60812, システム信頼性の分析手法 - 故障モードおよび影響分析の手順 (FMEA) |
10 Prognostics
10.1
availability
probability that a machine (1.10) will, when used under specified conditions, operate satisfactorily and effectively
10.2
prognosis
estimation of time to failure (1.7) and risk for one or more incipient failure modes (4.6)
Bibliography
| 1 | ISO 1925, Mechanical vibration — Balancing — Vocabulary |
| 2 | ISO 2041, Mechanical vibration, shock and condition monitoring — Vocabulary |
| 3 | ISO/IEC 2382-14, Information technology — Vocabulary — Part 14: Reliability, maintainability and availability |
| 4 | ISO 13373, (all parts), Condition monitoring and diagnostics of machines — Vibration condition monitoring |
| 5 | ISO 13374-1, Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines |
| 6 | ISO 13379 (all parts), Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques |
| 7 | ISO 13381-1, Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| 8 | ISO 17359, Condition monitoring and diagnostics of machines — General guidelines |
| 9 | ISO 18436 (all parts), Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel |
| 10 | IEC 60050-191, International Electrotechnical Vocabulary — Chapter 191: Dependability and quality of service |
| 11 | IEC 60812, Analysis techniques for system reliability — Procedure for failure mode and effects analysis (FMEA) |