この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、ISO/TC 43 技術委員会、音響、小委員会 SC 1, 騒音によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13473-1:1997) を廃止し、置き換えます。前版との主な変更点は以下の通りです。
— 連続データの傾き抑制などのいくつかの代替計算オプションが削除されました。
— ハイパス フィルタリングとローパス フィルタリングのより正確な定義が提供されました。
— スパイクの削除がプロファイルに導入されました。
— MPD は、すべてのMSDを平均した後に得られる全体値のみを参照するようになりました。 where MSD は平均セグメント深度を意味します (以前は、MPD は平均セグメント深度と平均プロファイル深度の両方を表す用語として使用されており、混乱を招いた可能性があります)
ISO 13473 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
ISO 13473-1:2019 のこの修正バージョンには、次の修正が含まれています。
- セグメントの長さはドキュメント全体で 100 mm に修正されました。
- 7.3 の 4 番目の段落の最後に、次の文が追加されました。「サンプリングされたプロファイルの先頭または末尾に 5 mm を超える無効なサンプルがある場合、影響を受けた MSD 値は破棄されるべきです。」最後の段落では、「プロファイル」が「セグメント」に置き換えられ、「測定値」が「サンプル」に置き換えられました。
- 7.6 では、3 番目の段落が次の段落に置き換えられました。「計算対象のセクションの前後に利用可能なデータがない場合は、フィルタリングの前に最初と最後のセグメントをミラーリングして信号を拡張する必要があります。」
- 7.10 では、最初のリスト要素が書き直されました。
- 第 10 条の次のテキストが削除されました:「スパイク除去手順が適用されたかどうか;」、「使用されたフィルターの種類と順序」。そして「使用される補間のタイプ」;
- D.3.7, 「7.10」を「7.9」に置き換えます。
- E.1, 5 番目の段落、3 番目の文が次のように追加されました:「スパイクは、補間された値で置き換えられる前に、順方向と逆方向で最初に識別されます。」
- 図 E.3 を修正しました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
This second edition cancels and replaces the first edition (ISO 13473-1:1997), which has been technically revised. The main changes compared to the previous edition are as follows:
— Some alternative calculation options such as the slope suppression for continuous data have been removed.
— A more precise definition of high-pass and low-pass filtering has been provided.
— Removal of spikes has been introduced in the profile.
— The MPD now refers only to the overall value obtained after averaging all MSDs where MSD means Mean Segment Depth (earlier, MPD was used as the term both for the mean segment depth and for mean profile depth, which might have been confusing).
A list of all parts in the ISO 13473 series can be found on the ISO website.
This corrected version of ISO 13473-1:2019 incorporates the following corrections:
- The segment length was corrected to 100 mm throughout the document;
- 7.3, at the end of the fourth paragraph, the following sentence was added:"If there are more invalid samples than 5 mm in the beginning or the end of a sampled profile the effected MSD value(s) should be discarded." and in the last paragraph,"Profiles" was replaced by"Segments" and"readings" replaced by"samples";
- 7.6, the third paragraph was replaced by the following one:"If there are no data available before and after the section to be computed, one should extend the signal by mirroring the first and the last segments before filtering.";
- 7.10, the first list element was rephrased;
- Clause 10, the following text was deleted:"whether or not spike removal procedure was applied;","type and order of filters used;" and"and type of interpolation used";
- D.3.7, replace"7.10" by"7.9";
- E.1, fifth paragraph, a third sentence was added as follows:"The spikes are first identified in forward and reverse direction before replacing them with the interpolated value.".
- Figure E.3 was corrected.