この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
の要素の一部が特許権の対象となる可能性があることに注意が必要です。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
情報に使用されている商号は、ユーザーの便宜のために付けられており、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 98, 構造の設計の基礎、小委員会 SC 2, 構造の信頼性によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13824:2009) を取り消して置き換えるものです。前作からの主な変更点は以下の通り。
- ISO 2394 の最新版 (ISO 2394:2015) に準拠するために、リスク情報に基づいたアプローチがリスク評価に新たに導入されました。
- 感度分析に関連する要件を導入することにより、リスク推定における不確実性の取り扱いに関する要件が更新されました。
- リスク対応の要件は、緊急事態への備えを含む予防および軽減措置の最適化の重要性を強調することによって更新されました。
- 人為的または自然な出来事によって引き起こされる望ましくない結果のリスク推定の例に関する新しい有益な付属書が追加されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 98, Bases for design of structures, Subcommittee SC 2, Reliability of structures.
This second edition cancels and replaces the first edition (ISO 13824:2009), which has been technically revised. The main changes compared to the previous edition are as follows:
- risk-informed approach has been newly introduced to risk assessment in order to comply with the latest edition of ISO 2394 (ISO 2394:2015);
- requirements for treatment of uncertainty in risk estimation have been updated by introducing requirements related to sensitivity analysis;
- requirements for risk treatment have been updated by emphasizing the importance of optimization of prevention and mitigation measures including emergency preparedness;
- new informative annexes on examples of risk estimation of undesirable consequences caused by human-induced or natural events have been added.