この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7225, ガスシリンダー — 注意ラベル
- ISO 7866, ガスシリンダー — 詰め替え可能なシームレスアルミニウム合金ガスシリンダー — 設計、製造、およびテスト
- ISO 9809-1, ガスシリンダー — 詰め替え可能なシームレス鋼製ガスシリンダー — 設計、製造、およびテスト — Part 1: 引張強度が 1 100 MPa 未満の焼入れおよび焼き戻し鋼シリンダー
- ISO 9809-2, ガスシリンダー — 詰め替え可能なシームレス鋼製ガスシリンダー — 設計、製造、およびテスト — Part 2: 引張強度が 1 100 MPa 以上の焼入れおよび焼き戻し鋼シリンダー
- ISO 9809-3, ガスシリンダー — 詰め替え可能なシームレス鋼製ガスシリンダー — 設計、製造、およびテスト — Part 3: 正規化された鋼製シリンダー
- ISO 10297:2014, ガスシリンダー — シリンダーバルブ — 仕様および型式のテスト
- ISO 11114-1, ガスシリンダー — シリンダーおよびバルブの材質とガス内容物の適合性 — Part 1: 金属材料
- ISO 11114-2, ガスシリンダー — シリンダーおよびバルブの材質とガス内容物の適合性 — Part 2: 非金属材料
- ISO 11114-4, 可搬性ガスシリンダー — シリンダーおよびバルブの材質とガス内容物の適合性 — Part 4: 水素脆化に対する耐性のある鋼を選択するための試験方法
- ISO 11119-1, ガスシリンダー — 詰め替え可能な複合ガスシリンダーおよびチューブ — 設計、製造およびテスト — Part 1: フープ巻き繊維強化複合ガスシリンダーおよびチューブ (最大 450 l)
- ISO 11119-2:2012, ガスシリンダー — 詰め替え可能な複合ガスシリンダーおよびチューブ — 設計、構造およびテスト — Part 2: 負荷分散金属ライナーを備えた最大 450 l の完全に包まれた繊維強化複合ガスシリンダーおよびチューブ
- ISO 11119-3, ガスシリンダー — 詰め替え可能な複合ガスシリンダーおよびチューブ — 設計、構造およびテスト — Part 3: 非負荷分散金属ライナーまたは非金属ライナーを備えた最大 450L の完全に包まれた繊維強化複合ガスシリンダーおよびチューブ
- ISO 14246, ガスシリンダー - シリンダーバルブ - 製造試験および検査
- ISO 1468, 水素燃料 — 製品仕様
- ISO 16528-1, ボイラーおよび圧力容器 - Part 1: 性能要件
- 危険物の輸送に関する国連勧告: モデル規制
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7225, Gas cylinders — Precautionary labels
- ISO 7866, Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
- ISO 9809-1, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
- ISO 9809-2, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
- ISO 9809-3, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders
- ISO 10297:2014, Gas cylinders — Cylinder valves — Specification and type testing
- ISO 11114-1, Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
- ISO 11114-2, Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
- ISO 11114-4, Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
- ISO 11119-1, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
- ISO 11119-2:2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
- ISO 11119-3, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
- ISO 14246, Gas cylinders — Cylinder valves — Manufacturing tests and examinations
- ISO 14687 (all parts), Hydrogen fuel — Product specification
- ISO 16528-1, Boilers and pressure vessels — Part 1: Performance requirements
- UN Recommendations on the Transport of Dangerous Goods: Model Regulations