この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO/TC 214 「昇降作業プラットフォーム」技術委員会によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 16368:2010) を廃止し、置き換えるものです。
主な変更点は以下のとおりです。
- ISO 16653-1 のすべての要件がこの文書に統合されています。
- 範囲、使用目的と目的を含む追加の詳細が追加されました。
- 規範的な参照が更新されました。
- 第 3 条では、本文中での使用をサポートするために 7 つの新しい定義が追加されました。
- 第 4 項が更新され、工具と材料の定格荷重の新しい数値が追加されました。表 1 と図 3 は、負荷感知と安定性の強化の例を個別に示し、より多くの実際の構成を含めるように改訂されました。検証方法は各条項から削除され、第 5 条の新しい表 7 に追加されました。アクセス システム要件が改訂され、表 4 と表 5 が追加されました。
- 第 6 項、附属書 F の内容は 6.2.1 に統合され、以前の附属書 F は削除されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 214, Elevating work platforms.
This third edition cancels and replaces the second edition (ISO 16368:2010), which has been technically revised.
The main changes are as follows:
- all requirements from ISO 16653-1 have been integrated into this document;
- the Scope, additional details have been added included intended use and objectives;
- the normative references have been updated;
- Clause 3, seven new definitions have been added to support their use in the text;
- Clause 4 has been updated to include a new figure for the rated load of tools and materials; Table 1 and Figure 3 have been revised to show load-sensing and enhanced stability examples separately and to include more working configurations; verification methods have been removed from each clause and placed in new Table 7 in Clause 5; access system requirements have been revised to include Table 4 and Table 5;
- Clause 6, the contents of Annex F have been merged into 6.2.1 and the previous Annex F has been deleted.