この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1421, ゴムまたはプラスチックでコーティングされた生地 — 引張強さと破断点伸びの測定
- ISO 3175-1, テキスタイル – 布地および衣類のプロフェッショナルケア、ドライクリーニングおよびウェットクリーニング – Part 1: クリーニングおよび仕上げ後の性能の評価
- ISO 4674-1, ゴムまたはプラスチックでコーティングされた布地 — 引裂抵抗の測定 — Part 1: 一定速度の引裂き方法
- ISO 4920, 繊維織物 — 表面の濡れに対する耐性の測定 (スプレー試験)
- ISO 5077, テキスタイル - 洗濯および乾燥時の寸法変化の測定
- ISO 6330, テキスタイル — テキスタイル試験のための家庭内での洗濯および乾燥手順
- ISO 6942, 防護服 — 熱および火災に対する保護 — 試験方法: 輻射熱源にさらされたときの材料および材料アセンブリの評価
- ISO 11092, テキスタイル — 生理学的影響 — 定常状態条件下での熱および水蒸気抵抗の測定 (発汗ガード付きホットプレート試験)
- ISO/TS 11999-2, 消防士用 PPE — 構造物内で発生した消火活動中に高レベルの熱や炎にさらされる危険がある消防士が使用する PPE のテスト方法と要件 — Part 2: 互換性
- ISO 12127-1, 熱および炎から保護するための衣服 — 防護服または構成材料を介した接触熱伝達の測定 — Part 1: 加熱シリンダーによって生成される接触熱
- ISO 12947-2, テキスタイル — マーティンデール法による布地の耐摩耗性の測定 — Part 2: 試験片の破壊の測定
- ISO 13688, 防護服 — 一般要件
- ISO 13934-1, テキスタイル — 生地の引張特性 — Part 1: ストリップ法を使用した最大力と最大力での伸びの決定
- ISO 13935-2, 繊維 — 生地および繊維製品の縫い目引張特性 — Part 2: グラブ法を使用した縫い目破断に対する最大力の決定
- ISO 13937-2, テキスタイル — 生地の引裂き特性 — Part 2: ズボン型試験片の引裂き力の測定 (単一引裂き法)
- ISO 14116, 防護服 — 炎からの保護 — 炎の広がりを制限した材料、材料アセンブリおよび衣服
- ISO 15025, 防護服 — 炎に対する保護 — 限定的な火炎伝播の試験方法
- ISO 16604, 血液および体液との接触に対する保護のための衣類 — 血液由来の病原体による侵入に対する防護服素材の耐性の測定 — Phi-X 174 バクテリオファージを使用した試験方法
- ISO 18639-1, 特定の救助活動を行う消防士のための PPE
- ISO 17493, 暑さから身を守るための衣服および装備 — 熱風循環オーブンを使用した対流耐熱性の試験方法
- ISO 20471, 高視認性衣類 — テスト方法と要件
- EN 1149-5, 防護服 - 静電気特性。材料性能と設計要件
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1421, Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
- ISO 3175-1, Textiles – Professional care, dry cleaning and wet cleaning of fabrics and garments – Part 1: Assessment of performance after cleaning and finishing
- ISO 4674-1, Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
- ISO 4920, Textile fabrics — Determination of resistance to surface wetting (spray test)
- ISO 5077, Textiles — Determination of dimensional change in washing and drying
- ISO 6330, Textiles — Domestic washing and drying procedures for textile testing
- ISO 6942, Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
- ISO 11092, Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- ISO/TS 11999-2, PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 2: Compatibility
- ISO 12127-1, Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder
- ISO 12947-2, Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
- ISO 13688, Protective clothing — General requirements
- ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
- ISO 13935-2, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
- ISO 13937-2, Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
- ISO 14116, Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing
- ISO 15025, Protective clothing — Protection against flame — Method of test for limited flame spread
- ISO 16604, Clothing for protection against contact with blood and body fluids — Determination of resistance of protective clothing materials to penetration by blood-borne pathogens — Test method using Phi-X 174 bacteriophage
- ISO 18639-1, PPE for firefighters undertaking specific rescue activities
- ISO 17493, Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
- ISO 20471, High visibility clothing — Test methods and requirements
- EN 1149-5, Protective clothing — Electrostatic properties. Material performance and design requirements