この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1402, ゴムおよびプラスチックのホースおよびホースアセンブリ - 静水圧試験
- ISO 4671, ゴムおよびプラスチックのホースおよびホースアセンブリ - ホースの寸法およびホースアセンブリの長さの測定方法
- ISO 4080:2009, ゴムおよびプラスチックのホースおよびホースアセンブリ - ガス透過性の測定
- ISO 6802, ゴムまたはプラスチックのホースおよびホースアセンブリ - 屈曲を伴う油圧インパルス試験
- ISO 6803:2017, ゴムまたはプラスチックのホースおよびホースアセンブリ - 屈曲を伴わない油圧インパルス試験
- ISO 7326:2016, ゴムおよびプラスチックホース — 静的条件下での耐オゾン性の評価
- ISO 8031:2009, ゴムおよびプラスチックのホースおよびホースアセンブリ - 電気抵抗と導電率の測定
- ISO 8330, ゴムおよびプラスチックのホースおよびホースアセンブリ — 語彙
- ISO 8331, ゴムおよびプラスチックのホースおよびホースアセンブリ - 選択、保管、使用、およびメンテナンスのガイドライン
- ISO 9227, 人工大気中での腐食試験 - 塩水噴霧試験
- ISO 15649, 石油および天然ガス産業 - 配管
- ISO 16964, ガスシリンダー - フレキシブルホースアセンブリ - 仕様とテスト
- ISO 17268気体水素陸上車両給油接続装置
- ISO 19880-1 1 、気体水素 — 給油ステーション — Part 1: 一般要件
- ISO 30013, ゴムおよびプラスチックのホース — 実験室の光源にさらす方法 — 色、外観、その他の物理的特性の変化の測定
- IEC 60243-1, 絶縁材料の耐電圧 — 試験方法 — Part 1: 電源周波数での試験
- IEC 62631-3-1, 固体絶縁材料の誘電特性および抵抗特性 — Part 3-1: 抵抗特性の測定 (DC 法) — 体積抵抗および体積抵抗率 — 一般的な方法
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1402, Rubber and plastics hoses and hose assemblies — Hydrostatic testing
- ISO 4671, Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- ISO 4080:2009, Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
- ISO 6802, Rubber or plastics hoses and hose assemblies — Hydraulic impulse test with flexing
- ISO 6803:2017, Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
- ISO 7326:2016, Rubber and plastics hoses — Assessment of ozone resistance under static conditions
- ISO 8031:2009, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
- ISO 8330, Rubber and plastics hoses and hose assemblies — Vocabulary
- ISO 8331, Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance
- ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests
- ISO 15649, Petroleum and natural gas industries — Piping
- ISO 16964, Gas cylinders — Flexible hoses assemblies — Specification and testing
- ISO 17268, Gaseous hydrogen land vehicle refuelling connection devices
- ISO 19880-1 1 , Gaseous hydrogen — Fuelling stations — Part 1: General requirements
- ISO 30013, Rubber and plastics hoses — Methods of exposure to laboratory light sources — Determination of changes in colour, appearance and other physical properties
- IEC 60243-1, Electric strength of insulating materials — Test methods — Part 1: Tests at power frequencies
- IEC 62631-3-1, Dielectric and resistive properties of solid insulating materials — Part 3-1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method