この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 442, プラスチック配管システム - 給水用のポリエチレン (PE) パイプおよび継手
- ISO 443, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE)
- ISO 4633, ゴムシール — 給水、排水および下水道パイプライン用ジョイントリング — 材料の仕様
- ISO 8772, 非加圧地下排水および下水用プラスチック配管システム — ポリエチレン (PE)
- ISO 12176-1, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 1: 突合せ融着
- ISO 12176-2, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 2: 電気融着
- ISO 16010, エラストマーシール - 気体燃料および炭化水素流体を輸送するパイプおよび継手で使用されるシールの材料要件
- EN 681-1, エラストマーシール — 水および排水用途で使用されるパイプジョイントシールの材料要件 — Part 1: 加硫ゴム
- EN 681-2, エラストマーシール — 水および排水用途で使用されるパイプジョイントシールの材料要件 — Part 2: 熱可塑性エラストマー
- EN 681-3, エラストマーシール — 水および排水用途で使用されるパイプジョイントシールの材料要件 — Part 3: 加硫ゴムの気泡材料
- EN 681-4, エラストマーシール — 水および排水用途で使用されるパイプジョイントシールの材料要件 — Part 4: 鋳造ポリウレタンシール要素
- EN 682, エラストマーシール - ガスおよび炭化水素流体を運ぶパイプおよび継手で使用されるシールの材料要件
- EN 1555-1, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- EN 1555-2, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- EN 1555-3, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- EN 1555-5, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
- EN 12201-1, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- EN 12201-2, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- EN 12201-3, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- EN 12201-5, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
- EN 12666-1, 非加圧地下排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 1: パイプ、継手およびシステムの仕様
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4427 (all parts), Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply
- ISO 4437 (all parts), Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE)
- ISO 4633, Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
- ISO 8772, Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
- ISO 12176-1, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
- ISO 12176-2, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
- ISO 16010, Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
- EN 681-1, Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber
- EN 681-2, Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers
- EN 681-3, Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber
- EN 681-4, Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements
- EN 682, Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
- EN 1555-1, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
- EN 1555-2, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
- EN 1555-3, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
- EN 1555-5, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
- EN 12201-1, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
- EN 12201-2, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
- EN 12201-3, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
- EN 12201-5, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
- EN 12666-1, Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE) — Part 1: Specifications for pipes, fittings and the system