この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
この文書の目的上、ISO 8549-1 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
耐力
時折発生する重大な事象を表す静的荷重。足首・足部のデバイスまたはフット ユニットが耐えることができ、意図したとおりに機能することができます。
3.2
究極の強さ
単一のイベント全体を表す静的荷重。足首-足部デバイスまたはフット ユニットによって耐えることはできますが、その後使用できなくなる可能性があります。
3.3
疲労強度
足首・足部デバイスまたはフットユニットが所定のサイクル数にわたって耐えることができる周期的負荷
3.4
バッチ
要件への適合性を実証するためのテストを行うために、テストラボ/施設に一緒に提出された足首・足部デバイスまたはフットユニットのテストサンプルのセット
3.5
衝撃吸収能力
力を比例的に増加させることなく、たわみによってエネルギーを吸収する試験片の能力
3.6
試験力
試験中のサンプルに加えられる力
注記 1:テスト装置、この文書の前のバージョンのテスト用に構築されたもの (正の符号が付いた圧縮力を使用) を再プログラムする必要はありません。
3.7
設備の精度
試験装置および治具および測定装置が直線寸法および角度寸法、試験力、および繰り返し試験の頻度を測定する精度
3.8
手順の正確さ
直線寸法と角度寸法を設定して最終的に調整する公差、試験力と傾斜角度の適用、および繰り返し試験の頻度の制御
参考文献
| 1 | ISO 8855, 道路車両 — 車両のダイナミクスとロードホールディング能力 — 語彙 |
| 2 | ISO 9787, ロボットとロボット装置 — 座標系と運動の命名法 |
| 3 | ISO/TR 22676:2006, 補綴物 — 足首・足のデバイスおよびフットユニットのテスト — ISO 22675 のテスト負荷条件の適用および適切なテスト装置の設計に関するガイダンス |
| 4 | S ions J. 下肢切断成人向け 6 分間歩行テスト、デラウェア大学、2019 年 1 月 ( https://cpb-us-w2.wpmucdn.com/sites.udel.edu/dist/2/3447/ファイル/2019/01/6-Minute-Walk-Test_Updated- January-2019-1rb8aq5.pdf ) |
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8549-1 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
proof strength
static load representing an occasional severe event, which can be sustained by the ankle-foot device or foot unit and still allow it to function as intended
3.2
ultimate strength
static load representing a gross single event, which can be sustained by the ankle-foot device or foot unit but which could render it thereafter unusable
3.3
fatigue strength
cyclic load that can be sustained by the ankle-foot device or foot unit for a given number of cycles
3.4
batch
set of test samples of an ankle-foot device or foot unit submitted together to a test laboratory/facility to undertake tests to demonstrate conformity with requirements
3.5
shock absorption capacity
capacity of a specimen to absorb energy by deflection without a proportional increase of force
3.6
test force
force applied to a sample under test
Note 1 to entry: Test equipment, build to test to previous versions of this document (using compression force with a positive sign) do not need to be reprogrammed.
3.7
accuracy of equipment
accuracy to which the test equipment and any jig and measuring device measures linear and angular dimensions, test forces and the frequency of cyclic tests
3.8
accuracy of procedure
tolerances with which linear and angular dimensions are set and finally adjusted, test forces and tilting angles are applied and the frequency of cyclic tests is controlled
Bibliography
| 1 | ISO 8855, Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary |
| 2 | ISO 9787, Robots and robotic devices — Coordinate systems and motion nomenclatures |
| 3 | ISO/TR 22676:2006, Prosthetics — Testing of ankle-foot devices and foot units — Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment |
| 4 | Sions J. 6-Minute Walk Test for Adults with Lower-Limb Amputations, University of Delaware, January 2019 ( https://cpb-us-w2.wpmucdn.com/sites.udel.edu/dist/2/3447/files/2019/01/6-Minute-Walk-Test_Updated-January-2019-1rb8aq5.pdf ) |