この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 3274 は、技術委員会 ISO/TC 57, 表面の計測と特性、小委員会 SC 1, 幾何学的パラメータ - 表面の粗さとうねりの測定のための機器と手順、 ISO/TC 3, 限界と適合、および ISO によって共同で作成されました。/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 5, 寸法と公差。
この ISO 3274 の第 2 版は、技術的に改訂された第 1 版 (ISO 3274:1975) および ISO 1880:1979 を取り消して置き換えます。
特に、接触 (スタイラス) 器具の公称特性とその技術開発が考慮されています。最新の機器は、ISO 11562 に準拠した位相補正フィルターを使用しています。
この規格の附属書 A, B, C および D は、情報提供のみを目的としています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3274 was prepared jointly by Technical Committees ISO/TC 57, Metrology and properties of surfaces, Subcommittee SC 1, Geometrical parameters — Instruments and procedures for measurement of surface roughness and waviness, ISO/TC 3, Limits and fits, and ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 5, Dimensioning and tolerancing.
This second edition of ISO 3274 cancels and replaces the first edition (ISO 3274:1975) as well as ISO 1880:1979, which have been technically revised.
In particular it takes into account the nominal characteristics of contact (stylus) instruments and their technical development. Modern instruments use phase-correct filters according to ISO 11562.
Annexes А, В, С and D of this International Standard are for information only.