この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
ISO 4046 のこの部分の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 4046-3 は、技術委員会 ISO/TC 6, 紙、板紙およびパルプによって作成されました。
ISO 4046-1, ISO 4046-2, ISO 4046-3, ISO 4046-4, および ISO 4046-5 は ISO 4046:1978 をキャンセルし、置き換えます。 ISO 4046:1978 が発行されて以来、この新しい一連の規格では多くの新しい用語が定義されています。ただし、ISO 4046 シリーズは、紙、板紙、およびパルプに関連するすべての用語の包括的なリストを意図したものではありません。これには、ISO 技術委員会 6 によって作成された ISO 規格に見られる関連用語の定義と、作業部会 6 の意見で標準化する必要があると考えられたその他の定義が含まれています。
ISO 4046 は、一般タイトル「紙、板紙、パルプおよび関連用語 - 語彙」の下にある次の部分で構成されています。
- Part 1: アルファベット順の索引
- Part 2: パルプ化の用語
- Part 3: 製紙用語
- Part 4: 紙および板紙のグレードと加工製品
- Part 5: パルプ、紙、板紙の特性
この第 2 版は、2014 年に廃止された前版 (ISO 4046-3:2002) を復活させたものです。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 4046 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4046-3 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps.
ISO 4046-1, ISO 4046-2, ISO 4046-3, ISO 4046-4 and ISO 4046-5 cancel and replace ISO 4046:1978. Many new terms have been defined in this new series of standards since ISO 4046:1978 was published. However, the ISO 4046 series is not intended to be a comprehensive list of all terms related to paper, board and pulps. It includes definitions of relevant terms which can be found in ISO standards prepared by ISO Technical Committee 6, as well as other definitions which, in the opinion of Working Group 6, needed to be standardized.
ISO 4046 consists of the following parts under the general title Paper, board, pulps and related terms — Vocabulary:
- Part 1: Alphabetical index
- Part 2: Pulping terminology
- Part 3: Paper-making terminology
- Part 4: Paper and board grades and converted products
- Part 5: Properties of pulp, paper and board
This second edition results from the reinstatement of the previous edition (ISO 4046-3:2002) which was withdrawn in 2014.