この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 8178-1:2020, レシプロ式内燃機関 — 排気ガス測定 — 1: ガス状および粒子状排出物のテストベッド測定システム
- ISO 8178-4:2020, レシプロ式内燃機関 — 排気ガス測定 — 4: さまざまなエンジン アプリケーションの定常状態および過渡状態のテスト サイクル
- ISO 8178-5, レシプロ式内燃機関 — 排気ガス測定 — 5: テスト燃料
- ISO 8178-6, レシプロ内燃機関 — 排気ガス測定 — 6: 測定結果と試験の報告
- ISO/IEC 17025, 試験所および校正所の能力に関する一般要件
- ISO 27145-4, 道路車両 — World-Wide Harmonized On-Board Diagnostics (WWH-OBD) 通信要件の実装 — 4: 車両と試験装置の接続
- ISO 15765-4, 道路車両 — コントローラー エリア ネットワーク (DoCAN) を介した診断通信 — 4: 排出物関連システムの要件
- ISO 13400, 道路車両 — インターネット プロトコル (DoIP) を介した診断通信
- ISO 15031-3, 道路車両 — 排気関連診断のための車両と外部機器間の通信 — 3: 診断コネクタと関連する電気回路: 仕様と使用法
- SAE J1939-73, アプリケーション層 - 診断
- ASTM E 29-06b, 試験データで有効数字を使用して仕様への適合性を判断するための標準プラクティス
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8178-1:2020, Reciprocating internal combustion engines — Exhaust emission measurement — 1: Test-bed measurement systems of gaseous and particulate emissions
- ISO 8178-4:2020, Reciprocating internal combustion engines — Exhaust emission measurement — 4: Steady-state and transient test cycles for different engine applications
- ISO 8178-5, Reciprocating internal combustion engines — Exhaust emission measurement — 5: Test fuels
- ISO 8178-6, Reciprocating internal combustion engines — Exhaust emission measurement — 6: Report of measuring results and test
- ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
- ISO 27145-4, Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — 4: Connection between vehicle and test equipment
- ISO 15765-4, Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — 4: Requirements for emissions-related systems
- ISO 13400, Road vehicles — Diagnostic communication over Internet Protocol (DoIP)
- ISO 15031-3, Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — 3: Diagnostic connector and related electrical circuits: Specification and use
- SAE J1939-73, Application layer – diagnostics
- ASTM E 29-06b, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications