※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 122, 包装、小委員会 SC 3, 包装、包装、および単位荷重の手段に関する性能要件および試験 (ISO/TC 122 で要求される)です。
この第 3 版は、技術的に改訂された第 2 版 (ISO 8317:2003) を取り消して置き換えるものです。また、Corrigenda, ISO 8317:2003/Corr 1:2005 も組み込まれています。
多くの編集上の改訂に加えて、前版に対して次の技術的改訂が行われました。
- 歴史的な議論を削除するために導入を改訂。
- 機械的試験、機械的試験データ、ライナー、基本特性、および軽微な修正 (2.6 から 2.10) の定義が追加されました。
- 以前の条項 3 および 4 は新しい条項 3 に統合され、その後の条項の番号が付け直されました。
- 以前の版 3.1, 3.2, および 4.2 の要件はテストの一部ではありませんでしたが、再配置され、参考になりました。これらは、Introduction に含まれるようになりました。
- はじめに、一連の同様のパッケージングの本質的な特性を考慮する必要があります (3.1.1)
- コンポーネントタイプの下で分離して一度に提出された一連の同様のパッケージングの評価に関する指示を明確化 (3.1.2.2, 3.1.2.3, 3.1.2.4);
- シリーズへの追加と軽微な変更に関する新しい条項を追加 (3.1.2.5)
- ISO 13127 への参照 (はじめにおよび 3.1.2.5);
- エラーを修正するために更新された連続テストのチャート (図 1 および 2)
- テストを追加する前に、組み込まれている改ざん防止機能のすべて (または一部) を無効にする必要があります (4.3)
- トルク依存クロージャーを備えたパッケージのサンプル調製用に追加されたトルクメーターの使用 (4.3)
- 個々のテスターが管理する子テストのパーセンテージの制限 (35%) を削除しました (4.4.3)
- 任意の 1 つのサイトから取得され、テストされた成人の数 (30) の制限、および個々のテスト担当者によって実施される成人テストの数 (35) の制限が削除されました (4.5.2)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 122, Packaging, Subcommittee SC 3, Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122).
This third edition cancels and replaces the second edition (ISO 8317:2003), which has been technically revised. It also incorporates the Corrigenda, ISO 8317:2003/Corr 1:2005.
In addition to a number of editorial revisions, the following technical revisions have been made with respect to the previous edition:
- introduction revised to remove historical discussion;
- definitions added for mechanical testing, mechanical test data, liner, essential characteristics, and minor modifications (2.6 to 2.10)
- former Clauses 3 and 4 consolidated into new Clause 3 and subsequent clauses renumbered;
- requirements in previous edition 3.1, 3.2 and 4.2 not part of the testing, have been relocated and are now informative. These are now included in the Introduction;
- introduction need to consider essential characteristics for a series of similar packaging (3.1.1);
- clarified instructions for evaluation of a series of similar packaging submitted at one time by separation under component type (3.1.2.2, 3.1.2.3, 3.1.2.4);
- added new subclause on additions to a series and minor modifications (3.1.2.5);
- reference made to ISO 13127 (Introduction and 3.1.2.5);
- charts for sequential testing updated to correct errors (Figures 1 and 2);
- need to disable all (or any) incorporated tamper evident features before testing added (4.3);
- use of torque meter added for sample preparation of packages with torque dependent closures (4.3);
- deleted the limit (35 %) for the percentage of child tests administered by an individual tester (4.4.3);
- deleted the limit for number (30) of adults obtained from and tested at any one site, and number (35) of adult tests administered by an individual tester (4.5.2).