この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 159, 人間工学、小委員会 SC 4, 人間とシステムの相互作用の人間工学です。
ISO 9241 は、次の部分で構成されており、一般的なタイトルは、「ビジュアル ディスプレイ ターミナル (VDT) を使用するオフィス ワークの人間工学的要件」です。
- Part 1: 一般的な紹介
- Part 2: タスク要件に関するガイダンス
- Part 5: ワークステーションのレイアウトと姿勢の要件
- Part 6部 作業環境の案内
- Part 11: ユーザビリティに関するガイダンス
- Part 12: 情報の提示
- Part 13: ユーザー ガイダンス
- Part 14: メニュー ダイアログ
- Part 15: コマンド ダイアログ
- Part 16: 直接操作ダイアログ
ISO 9241 は、人間とシステムの相互作用の人間工学という一般的なタイトルの下に、次の部分で構成されています。
- Part 20: 情報通信技術 (ICT) 機器およびサービスのアクセシビリティ ガイドライン
- Part 100: ソフトウェアエルゴノミクス関連規格の紹介【テクニカルレポート】
- Part 110: 対話の原則
- Part 129: ソフトウェアの個別化に関するガイダンス
- Part: フォーム
- Part 151: World Wide Web ユーザー インターフェイスに関するガイダンス
- Part 154: 対話型音声応答 (IVR) アプリケーション
- Part 161: ビジュアル ユーザー インターフェイス要素に関するガイダンス
- Part 171: ソフトウェアのアクセシビリティに関するガイダンス
- Part 210: 対話型システムの人間中心設計
- Part 300: 電子ビジュアル ディスプレイ要件の概要
- Part 302: 電子映像ディスプレイの用語
- Part 303: 電子ビジュアル ディスプレイの要件
- Part 304: 電子ビジュアル ディスプレイのユーザー パフォーマンス テスト方法
- Part 305: 電子ビジュアル ディスプレイの光学実験室試験方法
- Part 306: 電子ビジュアル ディスプレイのフィールド評価方法
- Part 307: 電子ビジュアル ディスプレイの分析およびコンプライアンス テスト方法
- Part 308: 表面伝導型電子放出ディスプレイ (SED) [テクニカルレポート]
- Part 309: 有機発光ダイオード (OLED) ディスプレイ[テクニカル レポート]
- Part 310: ピクセル欠陥の可視性、美学、人間工学[テクニカル レポート]
- Part 331: 自動立体ディスプレイの光学特性[テクニカル レポート]
- Part 391: 光過敏性発作を減らすための要件、分析、およびコンプライアンス テスト方法
- Part 392: 立体画像からの視覚疲労を軽減するための人間工学的推奨事項
- Part 400: 物理入力デバイスの原則と要件
- Part 410: 物理入力デバイスの設計基準
- Part 411: 物理入力デバイスの設計のための評価方法[技術仕様]
- Part 420: 物理入力デバイスの選択
- Part 910: 触覚および触覚相互作用のフレームワーク
- Part 920: 触覚および触覚相互作用に関するガイダンス
- Part 940: 触覚および触覚相互作用の評価
- Part 960: ジェスチャー インタラクションのフレームワークとガイダンス
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 159, Ergonomics, Subcommittee SC 4, Ergonomics of human–system interaction.
ISO 9241 consists of the following parts, under the general title Ergonomic requirements for office work with visual display terminals (VDTs):
- Part 1: General introduction
- Part 2: Guidance on task requirements
- Part 5: Workstation layout and postural requirements
- Part 6: Guidance on the work environment
- Part 11: Guidance on usability
- Part 12: Presentation of information
- Part 13: User guidance
- Part 14: Menu dialogues
- Part 15: Command dialogues
- Part 16: Direct manipulation dialogues
ISO 9241 also consists of the following parts, under the general title Ergonomics of human-system interaction:
- Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
- Part 100: Introduction to standards related to software ergonomics [Technical Report]
- Part 110: Dialogue principles
- Part 129: Guidance on software individualization
- Part 143: Forms
- Part 151: Guidance on World Wide Web user interfaces
- Part 154: Interactive voice response (IVR) applications
- Part 161: Guidance on visual user-interface elements
- Part 171: Guidance on software accessibility
- Part 210: Human-centred design for interactive systems
- Part 300: Introduction to electronic visual display requirements
- Part 302: Terminology for electronic visual displays
- Part 303: Requirements for electronic visual displays
- Part 304: User performance test methods for electronic visual displays
- Part 305: Optical laboratory test methods for electronic visual displays
- Part 306: Field assessment methods for electronic visual displays
- Part 307: Analysis and compliance test methods for electronic visual displays
- Part 308: Surface-conduction electron-emitter displays (SED) [Technical Report]
- Part 309: Organic light-emitting diode (OLED) displays [Technical Report]
- Part 310: Visibility, aesthetics and ergonomics of pixel defects [Technical Report]
- Part 331: Optical characteristics of autosterescopic displays [Technical Report]
- Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
- Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images
- Part 400: Principles and requirements for physical input devices
- Part 410: Design criteria for physical input devices
- Part 411: Evaluation methods for the design of physical input devices [Technical Specification]
- Part 420: Selection of physical input devices
- Part 910: Framework for tactile and haptic interaction
- Part 920: Guidance on tactile and haptic interactions
- Part 940: Evaluation of tactile and haptic interactions
- Part 960: Framework and guidance for gesture interactions