この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
A.1 一般
広帯域 V. シリーズ DCE (モデム) は、ITU-T によって、34 極の長方形の ISO/IEC 2593 コネクタと 37 極の長方形の ISO 4902 コネクタの両方に対して指定されました。長方形の ISO 4903 コネクタ。この状況では、適切なアダプターが必要です。
ISO/IEC 2593, ISO 4902, および ISO 4903 コネクタに関連する電気的インターフェイス特性も異なりますが、バージョン間の相互動作は可能です。
インターワーキングの手段は受動的です。
この附属書は、34 極コネクタを持たない DCE に接続するための 34 極長方形 ISO/IEC 2593 コネクタを実装した DTE が使用するパッシブ アダプタを指定します。
次の 2 つのアダプターが指定されています。
- a)最初のアダプターは、34 極コネクターを 37 極長方形 ISO 4902 コネクターに接続します。これは、データ伝送が 60 kHz から 108 kHz 帯域回路を使用する V. シリーズ ワイドバンド モデムを介して、または ITU-T 勧告 X を介して実行される場合です。公共データ ネットワーク上の .21bis 施設。
- b) 2 番目のアダプタは、X.21 自動発呼/応答手順を実行しない ITU-T 勧告 X.21 機能 (たとえば、X. 21の専用回線設備。
34/37 極アダプターと 34/15 極アダプターの両方に、制御交換回路の電気的保護手段があります。
アダプターの機械的なスタイルは定義されておらず、メーカーの裁量に任されています。短いケーブルで結合された 2 つのコネクタ、または剛性のあるハウジングで結合された同じ 2 つのコネクタの形をとる場合があります。
A.1 General
Wideband V.-series DCEs (modems) were specified by ITU-T for both the 34-pole rectangular ISO/IEC 2593 connector and the 37-pole rectangular ISO 4902 connector, while X.-series DCEs were specified for the 15-pole rectangular ISO 4903 connector. In this situation there is a need for suitable adaptors.
The electrical interface characteristics associated with the ISO/IEC 2593, ISO 4902 and ISO 4903 connectors are also different, but interworking between the versions is possible.
The means for interworking are passive.
This annex specifies passive adaptors for use by a DTE that has implemented a 34-pole rectangular ISO/IEC 2593 connector for attachment to a DCE that does not have a 34- pole connector.
Two adaptors are specified:
- a) The first adaptor connects a 34-pole connector to a 37-pole rectangular ISO 4902 connector, if data transmission is performed via V.-series wideband modems using the 60 kHz to 108 kHz band circuits, or via ITU-T Recommendation X.21bis facilities on public data networks.
- b) The second adaptor connects a 34-pole connector to a 15-pole rectangular ISO 4903 connector, if ITU-T Recommendation X.21 facilities are used which do not operate X.21 automatic calling/answering procedure, for instance, X.21 leased circuit facilities.
Both the 34/37-pole adaptor and the 34/15-pole adaptor have the means for electrical protection of the control interchange circuits.
The mechanical style of an adaptor is not defined and is left to the discretion of the manufacturers. It may take the form of two connectors joined by a short cable, or the same two connectors joined by a rigid housing.