この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
A.3 電気的特性
すべての広帯域 V.series DCE は、データ交換回路とタイミング交換回路で平衡二重電流電気特性を使用し、制御交換回路で不平衡二重電流電気特性を使用するように標準化されています。 X.21bis でさらに定義されているように、同等の公衆データ ネットワーク機能は同じものを使用します。
インターフェース ケーブルが短い場合 (例: 10 m)、平衡型ケースでのインターワーキングが可能です。不平衡な場合のインターワーキングには、V.10 交換回線受信機を保護する手段が必要です。これらの手段は、ISO 4902:1990 の附属書 C および ISO 4903:1989 の附属書 C に記述されており、この国際規格で採用されています。
A.3 Electrical characteristics
All wideband V.series DCEs are standardized for the use of balanced double-current electrical characteristics on data and timing interchange circuits and the use of unbalanced double-current electrical characteristics on the control interchange circuits. As further defined in X.21bis, the equivalent public data network facilities use the same.
Interworking in the balanced case is possible, if the interface cable is short (e.g. 10 m). Interworking in the unbalanced case requires means for protection of V.10 interchange circuit receivers. These means are described in ISO 4902:1990, annex C and ISO 4903:1989, annex C and are adopted in this International Standard.