この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、技術委員会 ISO/TC 60, 歯車、小委員会 SC 2, 歯車容量計算によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO/TS 6336-20:2017) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- かさ歯車を正確にカバーする ISO/TS 10300-20:2021 の発行後、かさ歯車関連のコンテンツは削除されました。
- 熱弾性係数の単位X M が 5.2 および A.4 で修正されました。
- 点 D における作用線上のパラメータГD を計算する式 (30) が改訂されました。
- 換算弾性率E r を計算する式 (A.10) が修正されました。
- 熱接触係数B M1およびB M2を計算する式 (A.11) および (A.12) が修正されました。
- 参考文献が更新されました。
ISO 6336 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 60, Gears, Subcommittee SC 2, Gear capacity calculation.
This second edition cancels and replaces the first edition (ISO/TS 6336-20:2017), which has been technically revised.
The main changes are as follows:
- bevel gear related content has been removed after the publication of ISO/TS 10300-20:2021 which precisely covers bevel gears;
- unit of the thermo-elastic factor, XM, has been corrected in 5.2 and A.4;
- Formula (30) to calculate the parameter on the line of action at point D, ГD, has been revised;
- Formula (A.10) to calculate the reduced modulus of elasticity, Er, has been corrected;
- Formulae (A.11) and (A.12) to calculate the thermal contact coefficients, BM1 and BM2, have been corrected;
- Bibliography has been updated.
A list of all parts in the ISO 6336 series can be found on the ISO website.