この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1122-1, 歯車用語の語彙 - Part 1: 形状に関する定義
- ISO 1328-1, 円筒歯車 — ISO の逃げ面公差分類システム — Part 1: 歯車の歯面に関連する偏差の定義と許容値
- ISO 6336-1, 平歯車およびはすば歯車の負荷容量の計算 - Part 1: 基本原則、導入および一般的な影響要因
- ISO 10825, ギア - ギア歯の摩耗と損傷 - 用語
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1122-1, Vocabulary of gear terms — Part 1: Definitions related to geometry
- ISO 1328-1, Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- ISO 6336-1, Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
- ISO 10825, Gears — Wear and damage to gear teeth — Terminology