この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
この国際規格は、シリンダー バルブのクロージャーとしての機能をカバーしています (国連モデル規則で定義されています)シリンダー バルブのその他の機能 (圧力調整器、残圧装置、逆止装置、圧力逃がし装置など) は、他の規格や規制でカバーされる場合があります。
この国際規格に適合するシリンダー バルブは、通常の使用条件下で満足のいく性能を発揮することが期待できます。
この国際規格は、次の点に特に注意を払っています。
- a)材料の適合性
- b)安全性 (機械的強度、衝撃強度、耐久性、気密性、耐着火性、耐アセチレン逆火性);
- c)テスト;
- d)マーキング。
この規格は、国連モデル規則に準拠するように作成されています。公開されると、国連危険物輸送に関する専門家小委員会に提出され、国連モデル規則に含めるよう要請されます。
この国際規格と適用される規制との間に矛盾がある場合は、常に規制が優先されます。
まえがきに記載されている変更点を考慮すると、シリンダ弁がこの国際規格の前のバージョンに従って承認されている場合、同じシリンダ弁をこの新しい版に承認する責任を負う機関は、どの試験を実施する必要があるかを検討する必要があります。
この国際規格では、工業用ガスの分野で広く使用されているため、単位バーが使用されています。ただし、bar は SI 単位ではなく、対応する圧力の SI 単位は Pa (1 bar = 10 5 Pa = 10 5 N/m 2 ) であることに注意してください。
この国際規格で与えられている圧力値は、特に断りのない限り、ゲージ圧 (大気圧を超える圧力) として与えられています。
Introduction
This International Standard covers the function of a cylinder valve as a closure (defined by the UN Model Regulations). Additional features of cylinder valves (e.g. pressure regulators, residual pressure devices, non-return devices and pressure relief devices) might be covered by other standards and/or regulations.
Cylinder valves complying with this International Standard can be expected to perform satisfactorily under normal service conditions.
This International Standard pays particular attention to:
- a) suitability of materials;
- b) safety (mechanical strength, impact strength, endurance, leak tightness, resistance to ignition, resistance to acetylene flashback);
- c) testing;
- d) marking.
This standard has been written to be in conformity with the UN Model Regulations. When published it will be submitted to the UN Sub Committee of Experts on the Transport of Dangerous Goods with a request that it be included in the UN Model Regulations.
Where there is any conflict between this International Standard and any applicable regulation, the regulation always takes precedence.
Considering the changes described in the Foreword, when a cylinder valve has been approved according to the previous version of this International Standard the body responsible for approving the same cylinder valve to this new edition should consider which tests need to be performed.
In this International Standard the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2).
Pressure values given in this International Standard are given as gauge pressure (pressure exceeding atmospheric pressure) unless noted otherwise.