この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下の参照文書は、全体または一部がこの文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 148-1, 金属材料 — シャルピー振り子衝撃試験 — Part 1: 試験方法
- ISO 407, 小型医療用ガス シリンダー — ピンインデックス ヨーク型バルブ接続
- ISO 10286, ガスボンベ — 用語
- ISO 10524-3, 医療用ガスで使用するための圧力調整器 — Part 3: シリンダーバルブと統合された圧力調整器
- ISO 11114-1, ガスボンベ — ボンベおよびバルブ材料とガス内容物との適合性 — Part 1: 金属材料
- ISO 11114-2, ガスボンベ — ボンベおよびバルブ材料とガス内容物との適合性 — Part 2: 非金属材料
- ISO 11117:2008ガスボンベ - バルブ保護キャップおよびバルブガード - 設計、構造および試験
- ISO 13341, ガスボンベ — ガスボンベへのバルブの取り付け
- ISO 15615:2013, ガス溶接装置 - 溶接、切断および関連プロセス用のアセチレン マニホールド システム - 高圧装置の安全要件
- ISO 15996, ガスシリンダー - 残圧バルブ - 一般要件および型式試験
- ISO 22435, ガスシリンダー — 圧力調整器が組み込まれたシリンダーバルブ — 仕様および型式試験
2 Normative references
The following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method
- ISO 407, Small medical gas cylinders — Pin-index yoke-type valve connections
- ISO 10286, Gas cylinders — Terminology
- ISO 10524-3, Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves
- ISO 11114-1, Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
- ISO 11114-2, Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
- ISO 11117:2008, Gas cylinders — Valve protection caps and valve guards — Design, construction and tests
- ISO 13341, Gas cylinders — Fitting of valves to gas cylinders
- ISO 15615:2013, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices
- ISO 15996, Gas cylinders — Residual pressure valves — General requirements and type testing
- ISO 22435, Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing