この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 12100-1:2003, 機械の安全性 — 基本概念、設計の一般原則 — Part 1: 基本用語、方法論
- ISO 12100-2:2003, 機械の安全性 — 基本概念、設計の一般原則 — Part 2: 技術原則
- ISO 13849-1:2006, 機械の安全性 — 制御システムの安全関連部分 — Part 1: 設計の一般原則
- ISO 13849-2:2003, 機械の安全性 — 制御システムの安全関連部分 — Part 2: 検証
- ISO 13850:2006, 機械の安全性 - 緊急停止 - 設計原則
- ISO 14120:2002, 機械の安全性 — ガード — 固定および可動ガードの設計および構造に関する一般要件
- ISO 14121:1999, 機械の安全性 - リスク評価の原則
- ISO 14122-1:2001, 機械の安全性 — 機械への恒久的なアクセス手段 — Part 1: 2 つのレベル間の固定アクセス手段の選択
- ISO 14122-2:2001, 機械の安全性 — 機械への恒久的なアクセス手段 — Part 2: 作業プラットフォームと通路
- ISO 14122-3:2001, 機械の安全性 — 機械への恒久的なアクセス手段 — Part 3: 階段、脚立およびガードレール
- ISO 14122-4:2004, 機械の安全性 — 機械への恒久的なアクセス手段 — Part 4: 固定はしご
- IEC 60204-1:2005, 機械の安全性 - 機械の電気機器 - Part 1: 一般要件
- IEC 62061:2005, 機械の安全性 - 安全関連の電気、電子、およびプログラマブル電子制御システムの機能安全
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology
- ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles
- ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
- ISO 13849-2:2003, Safety of machinery — Safety-related parts of control systems — Part 2: Validation
- ISO 13850:2006, Safety of machinery — Emergency stop — Principles for design
- ISO 14120:2002, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards
- ISO 14121:1999, Safety of machinery — Principles of risk assessment
- ISO 14122-1:2001, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of a fixed means of access between two levels
- ISO 14122-2:2001, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
- ISO 14122-3:2001, Safety of machinery — Permanent means of access to machinery — Part 3: Stairways, stepladders and guard-rails
- ISO 14122-4:2004, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
- IEC 60204-1:2005, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
- IEC 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems