ISO 16779:2015 官能分析—食品の貯蔵寿命の評価(決定と検証) | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。

この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました 。 www.iso.org/directives

このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents

このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。

適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照してください。

この文書を担当する委員会は、ISO/TC 34, 食品、小委員会 SC 12, 官能分析です。

序章

経時的な製品変化の測定は、食品の貯蔵寿命 (賞味期限と使用期限) の決定と検証の基礎となります。

1 スコープ

この国際規格は、官能試験による食品の貯蔵寿命の決定と検証の方法を指定しています。評価する官能特性は、想定される保存期間中の外観、におい、風味、味、三叉神経、食感の変化です。

個々のアプローチの開発をサポートすることを目的としています。

この国際規格は、その使用に関連する安全上の懸念があるとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、使用前に規制制限の適用可能性を判断することは、この国際規格の使用者の責任です。

注記貯蔵寿命を計算する目的で、微生物学的、化学的および物理的調査結果が官能検査に加えて使用される前。

2 参考文献

以下の文書は、全体または一部がこの文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

3 用語と定義

このドキュメントの目的のために、ISO 5492 および以下に記載されている用語と定義が適用されます。

3.1

賞味期限

製品が市場に出続け、主張された特定の品質を保持する、記載された保管条件下での期間の終了を意味する最小耐久性の日付 (賞味期限)

グレード 1 ~ エントリ:製品が完全に満足できるものになる前の日付。

3.2

日付までに使用

定められた保管条件下での推定期間の終了を意味する日付。それ以降は、消費者が通常期待する品質特性が製品におそらく備わっていない可能性があります。

注記 1:この日以降、食品は市場に出回るものとみなされるべきではない。

3.3

指定保管条件

指定された環境パラメータは、定義された期間にわたって一定に保たれます

3.4

保管条件指定なし

環境に応じて発生し、時間の経過とともに変化する可能性のある環境パラメーター

3.5

製品変更を加速するための保管条件

製品の特定の特性の変化を加速するために適用される環境パラメータ。

3.6

サンプリング計画

開始点、試験期間、試験間隔、予想される終点、適切な試験方法、試験サンプルと参照サンプルの数と量、および保管条件の仕様

3.7

出発点

テストの最初の日、テストシリーズの開始

3.8

テスト期間

製品固有の特性を調査する期間

3.9

テスト間隔

試験期間内の個々の官能試験間の定義された期間

3.10

終点

テストの最終日、テストシリーズの終了

3.11

試験方法

有効期間の検証のための適切な方法 (感覚的、および該当する場合は物理的、化学的、および/または微生物学的)

3.12

参照サンプル

テストされる製品が比較される製品

参考文献

1ISO 4120, 官能分析 — 方法論 — トライアングル テスト
2ISO 5495, 官能分析 — 方法論 — 対比較試験
3ISO 6658, 官能分析 - 方法論 - 一般的なガイダンス
4ISO 8587,官能分析 - 方法論 - ランキング
5ISO 8589, 官能分析 — 試験室の設計に関する一般的なガイダンス
6ISO 10399, 官能分析 — 方法論 — デュオトリオ試験
7ISO 11036, 官能分析 — 方法論 — 質感プロファイル
8ISO 11136, 官能分析 — 方法論 — 管理区域で消費者を対象にヘドニック テストを実施するための一般的なガイダンス
9ISO 13299, 官能分析 — 官能プロファイルを確立するための一般的なガイダンス
10A. ギメネス、 Food Research International 49, 2012 pp 311-325
11G Hough, Journal of Sensory Studies 27, 2012 pp 137-147
12G Hough 、食品の官能貯蔵寿命推定、CRC Press

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 34, Food products, Subcommittee SC 12, Sensory analysis.

Introduction

Measurements of product changes over time provide a basis for the determination and verification of the shelf life of foodstuffs (best before date and use by date).

1 Scope

This International Standard specifies methods for the determination and verification of the shelf life of foodstuffs by means of sensory tests. Sensory characteristics to be evaluated are changes in appearance, odour, flavour, taste, trigeminal sensation, and texture during assumed preservation periods.

It is intended to support the development of individual approaches.

This International Standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

NOTE For the purposes of calculating the shelf life, before microbiological, chemical and physical investigation results are used in addition to sensory testing.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO 5492, Sensory analysis — Vocabulary

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 5492 and the following apply.

3.1

best before date

date of minimum durability (best before date) which signifies the end of the period under any stated storage conditions during which the product will remain marketable and will retain any specific quality for which claims have been made

Note 1 to entry: Date before the product may still be perfectly satisfactory.

3.2

use by date

date which signifies the end of the estimated period under any stated storage conditions, after which the product probably will not have the quality attributes normally expected by consumers

Note 1 to entry: After this date, the food should not be regarded as marketable.

3.3

specified storage condition

specified environmental parameter kept constant over a defined period of time

3.4

not specified storage condition

environmental parameter which arise depending on the environment and may change over time

3.5

storage condition intended to accelerate product changes

environmental parameter applied to accelerate changes of the specific characteristics of a product

3.6

sampling plan

specification of the starting point, the test period, the test intervals, the expected endpoint, the suitable test method, the number and amount of test samples and reference samples, and the storage conditions

3.7

starting point

first date of test, beginning of the test series

3.8

test period

period of time over which the product-specific characteristics are investigated

3.9

test interval

defined period of time between the individual sensory tests within the test period

3.10

endpoint

last date of test, end of the test series

3.11

test method

suitable method (sensory and, if relevant, physical, chemical and/or microbiological) for verification shelf life assessment

3.12

reference sample

product with which the product to be tested is compared

Bibliography

1ISO 4120, Sensory analysis — Methodology — Triangle test
2ISO 5495, Sensory analysis — Methodology — Paired comparison test
3ISO 6658, Sensory analysis — Methodology — General guidance
4ISO 8587, Sensory analysis — Methodology — Ranking
5ISO 8589, Sensory analysis — General guidance for the design of test rooms
6ISO 10399, Sensory analysis — Methodology — Duo-trio test
7ISO 11036, Sensory analysis — Methodology — Texture profile
8ISO 11136, Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in a controlled area
9ISO 13299, Sensory analysis — General guidance for establishing a sensory profile
10A. Giménez, Food Research International 49, 2012 pp 311-325
11G. Hough,Journal of Sensory Studies 27, 2012 pp 137-147
12G. Hough, Sensory Shelf Life Estimation of Food Products, CRC Press